|
Author
|
Topic: main pulley bolt size??(if that sounds right)
|
707clone
¯
Member # 10342
|
posted
 
 
im in the middle of takin this thing apart for my hci swap an dont hav a socket big enuff for the main pulley bolt!!
--------------------
Maybe I should get drunk off my HATERADE elsewhere?
I was slow to take the hint, so I'm taking a break from CAFords for the rest of the month. Now excuse me while I enjoy some cereal. Mmmmm Mmmmm good. Who else wants to join me?
Lil Ric!
R.I.P CHARLIE HUSTLE!
91gt p heads,b cam,3:55s,exhaust
89 coupe just startin on him
Posts: 2614 | From: v a dubble | Registered: Sep 2010
| :
|
|
ddarkslayer
¯
Member # 10688
|
posted
there is three bolts holding the pulley to the harmonic balancer and there is the one that is in the middle
Posts: 307 | From: Folsom | Registered: Feb 2011
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
I might be wrong, but last I remember it was somewhere around 24mm, if you get a large impact deep socket set you should have the correct size.
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
707clone
¯
Member # 10342
|
posted
quote:
Originally posted by Blind:
I might be wrong, but last I remember it was somewhere around 24mm, if you get a large impact deep socket set you should have the correct size.
before i take this off do i even hav to take that off doin a hci swap??
--------------------
Maybe I should get drunk off my HATERADE elsewhere?
I was slow to take the hint, so I'm taking a break from CAFords for the rest of the month. Now excuse me while I enjoy some cereal. Mmmmm Mmmmm good. Who else wants to join me?
Lil Ric!
R.I.P CHARLIE HUSTLE!
91gt p heads,b cam,3:55s,exhaust
89 coupe just startin on him
Posts: 2614 | From: v a dubble | Registered: Sep 2010
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
probably be pretty hard to get the timing cover off if you don't.
and you'll need a socket and breaker bar to help set your timing and check piston to valve clearance and setup the rockers...
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
707clone
¯
Member # 10342
|
posted
quote:
Originally posted by Blind:
probably be pretty hard to get the timing cover off if you don't.
and you'll need a socket and breaker bar to help set your timing and check piston to valve clearance and setup the rockers...
good lookin blind!!
--------------------
Maybe I should get drunk off my HATERADE elsewhere?
I was slow to take the hint, so I'm taking a break from CAFords for the rest of the month. Now excuse me while I enjoy some cereal. Mmmmm Mmmmm good. Who else wants to join me?
Lil Ric!
R.I.P CHARLIE HUSTLE!
91gt p heads,b cam,3:55s,exhaust
89 coupe just startin on him
Posts: 2614 | From: v a dubble | Registered: Sep 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
