|
Author
|
Topic: supercharger timeing ?
|
triple black hatch
CAFords OG
Member # 5420
|
posted
 
 
what should i set the time with a paxton sc?
Posts: 1409 | From: (650)-(209) | Registered: Mar 2005
| :
|
|
CornOil_&_Boost
¯
Member # 5888
|
posted
how much boost?
any other mods?...
you need to buy an MSd boost timing master....they are much more reliable than setting your initial timing....
--------------------
https://www.facebook.com/pushrodpoweredmustangs
'95 Cobra - small engine / small turbo -
'02 Excursion 7.3 - tow vehicle
'14 - Chevy Volt - DD
Posts: 5097 | Registered: Jul 2005
| :
|
|
2stangs69-91
¯
Member # 1951
|
posted
if you do not have a boost controller pull the spout connector and lock your timming in at around 20. If it pings back it down.
--------------------
69 Mustang on hold
1991 LX hatch getting a make over
1994 F150 4X4 351
2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|
kingmoochr
¯
Member # 5834
|
posted
LOCK NOT SET!!! in case that wasnt clear enough
Posts: 880 | Registered: Jul 2005
| :
|
|
triple black hatch
CAFords OG
Member # 5420
|
posted
the mods are on my signature what do you mean by lock?
Posts: 1409 | From: (650)-(209) | Registered: Mar 2005
| :
|
|
kingmoochr
¯
Member # 5834
|
posted
lock out the advance so the timing is ALWAYS 20 degrees
Posts: 880 | Registered: Jul 2005
| :
|
|
2stangs69-91
¯
Member # 1951
|
posted
sorry..set the timming at 20 deg with your spout out. Then do not put the spout connector back in. Just drive your car with the spout removed,this way your timming will always stay at 20 deg. It is safer to do your timming this way on a untuned blower set up.
--------------------
69 Mustang on hold
1991 LX hatch getting a make over
1994 F150 4X4 351
2006 Yamaha V-max 1200 Modded
Posts: 3711 | From: Redding | Registered: Oct 2002
| :
|
|
92stangLX
¯
Member # 3252
|
posted
start with 10 degrees base timing
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
street_illegal_stang
¯
Member # 1554
|
posted
Im interested in this topic.
How much boost can you run safely with a bone stock 5.0 with oem head gaskets on pump gas using a cheapo sn93 ball bearing paxton,
24 pound injectors,255lph fuel pump,adj fpr,
f.m.u., and the timing set like explained above?
with no btm only 5-6psi right? I know its a silly question but I like knowing the limits of the stock head gaskets.
Posts: 1276 | From: Long Beach C.A | Registered: Jul 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
