|
Author
|
Topic: 18x9's ?'s
|
|
|
GT302PONY
¯
Member # 6658
|
posted
 
 
is lowered my friends 89 gt rubbed alot with 18 9s with 265/45/18 my car rubs in the front with 17s 245/45/17 i had to go with 245/40 instead
Posts: 259 | From: san jose | Registered: Mar 2006
| :
|
|
BlowN67
¯
Member # 4229
|
posted
being that his is an earlier model. the k-member is just alittle narrow than 86-93. I had 18x9 in the front of my 84 svo with sn95 arms, an 96+ spindals. pretty much the widest u can go a i hade minimal rubbing on the outer fender. so maybe foxbody arms an 94/95 spindals should be just about perfect. just my 2cents. since i know what i have ran with. JOHN
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
Camaro Kid Z/28
¯
Member # 3100
|
posted
quote:
Originally posted by BlowN67:
being that his is an earlier model. the k-member is just alittle narrow than 86-93. I had 18x9 in the front of my 84 svo with sn95 arms, an 96+ spindals. pretty much the widest u can go a i hade minimal rubbing on the outer fender. so maybe foxbody arms an 94/95 spindals should be just about perfect. just my 2cents. since i know what i have ran with. JOHN
what if all the suspension is all stock?
--------------------
1973 Camaro Z/28(clone)
http://www.cardomain.com/ride/2649130
"4-eyes forever essay!"
Posts: 6429 | From: 408 | Registered: Jul 2003
| :
|
|
BlowN67
¯
Member # 4229
|
posted
i have stock kmember,sn95 lower arms, 96+spindals,sn95 sigle calibur, mclaren springs, stock shockshard to tell from this pic but it didnt rub on fender but they were rolled from previuos owner.
[ June 13, 2007, 12:20 AM: Message edited by: BlowN67 ]
--------------------
AIM gonein67 JOHN
* californiafords.com
* corral.net
* foureyedpride.com
* yellowbullet.com
* theturboforums.com
Posts: 9809 | From: Home of LARD | Registered: Mar 2004
| :
|
|
bomrrman84
¯
Member # 7244
|
posted
i have 18X9 on my 91 gt. it lowered 1 1/2 inches and if you try and do a u turn with it to the lock it rubs. but if you give it enough gas you dont have to worry about that. honestly though the A arms have a metal rube plate for that exact reason. they should fit fine.
--------------------
91' GT convertible 331 under construction
91' GT hatch daily driver
Posts: 93 | From: suisun city | Registered: Nov 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
