|
Author
|
Topic: trans???
|
FONYPONY7o7
¯
Member # 7208
|
posted
 
 
what does EEC-IV refering to a tranny stand for????
Posts: 26 | From: YAY AREA | Registered: Nov 2006
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
absolutely nothing.
EEC-IV refers to the ECU, or engine control unit. Like OBDII for 1996+ cars.
EEC-IV auto tranny's like the AOD are not computer controlled at all.
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
FONYPONY7o7
¯
Member # 7208
|
posted
right on i didnt know but i did kno about the obd 1 and 2 i did a swap on my notch from a 4 clin ado to a 50 t5 i was wondering if there was any wires or harness i need to change from a ado to a t5 ????
Posts: 26 | From: YAY AREA | Registered: Nov 2006
| :
|
|
Blind
2.3L
CAFords OG
Member # 3052
|
posted
you should get the trans harness from a t5 car, so the neutral switch and backup lites function right.
the harness connects in the drivers side kickpanel and runs under the carpet to a grommet in the trans tunnel where it connects to the trans.
takes 30 seconds to swap if you have the center console and front seat out.
--------------------
89 LX Notchback ex 4cyl, 14psi
02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
FONYPONY7o7
¯
Member # 7208
|
posted
so i wont have any reverse lights? is that it or will i throw any codes on the cluster???
Posts: 26 | From: YAY AREA | Registered: Nov 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
