Author
|
Topic: my suspension setup....
|
two-gun kid2
¯
Member # 5891
|
posted
just seeing what you guys think of my setup, should be done a week or two after i get my car back. 1.maier racing sub frame connectors 2.maier racing strut tower prace 3.MM 4 point K member brace 4.MM lower control arms(non adjustable) 5.FRPP HD upper control arms 6.the TQ boxes are going to be reinforced(all seams welded and wolfe race craft lower tq box reinforcment plates) basicly just a basic setup for now.more to come later.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
Blind
2.3L CAFords OG
Member # 3052
|
posted
sounds good, but those mods without good shocks/stuts and springs will just amplify how shitty the stock springs/shocks/struts are.
chassis stiffening makes a huge difference, and those sound like a good base to do the rest of the suspension off of.
-------------------- 89 LX Notchback ex 4cyl, 14psi 02 Harley F150, 15psi
Posts: 8521 | From: Fairfield | Registered: Jul 2003
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
quote: Originally posted by blind: sounds good, but those mods without good shocks/stuts and springs will just amplify how shitty the stock springs/shocks/struts are.
chassis stiffening makes a huge difference, and those sound like a good base to do the rest of the suspension off of.
oh i aready have some tokico illumina struts and edelbrock ias shocks. i want to get some eibach sportline springs.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|
92stangLX
¯
Member # 3252
|
posted
Get some springs for sure. I would also look into some better upper control arms.
BTW, who is doing you torque boxes and how much are they charging you. I would like to get mine done so I am trying to get some ideas
Posts: 5302 | From: San Francisco | Registered: Sep 2003
| :
|
|
two-gun kid2
¯
Member # 5891
|
posted
quote: Originally posted by 92stangLX: Get some springs for sure. I would also look into some better upper control arms.
BTW, who is doing you torque boxes and how much are they charging you. I would like to get mine done so I am trying to get some ideas
spec-fab is going to do mine, pm him for a price.
Posts: 5566 | From: Hayward,Ca | Registered: Jul 2005
| :
|
|