Author
|
Topic: rear end help
|
PWR HNGRY 302
¯
Member # 6000
|
posted
Iam trying to pull the axles off a 7.5 rear end but for some reason the pin inbetween the axles wont come out so i cant push the axles in and pull of the c clips. Is there something else holding in the pin beside that one small bolt? [ April 04, 2006, 09:14 PM: Message edited by: PWR HNGRY 302 ]
-------------------- 87 Fox- Restoration in progress 2014 Tacoma DCLB MGM 2017 Prius Prime (The Daily)
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|
silverLX
¯
Member # 3207
|
posted
pound the pin down 1/2" and then rotate the carrier 180* and pull the pin out with pliers, vice grips, etc.
-------------------- 88LX hatch 410w 88LX vert gears, exhaust 95GT H/C/I
Posts: 1613 | From: Sonoma County | Registered: Aug 2003
| :
|
|
PWR HNGRY 302
¯
Member # 6000
|
posted
Thanks, i just figured out that the bolt broke so i only pulled out about a quarter of it. Is the pin easy to break? [ April 02, 2006, 01:10 PM: Message edited by: PWR HNGRY 302 ]
-------------------- 87 Fox- Restoration in progress 2014 Tacoma DCLB MGM 2017 Prius Prime (The Daily)
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|
exchp6400
¯
Member # 4803
|
posted
i had the same prob. as you with the broken bolt stuck inside.....i used one of those magnet pins
Posts: 578 | From: Bay | Registered: Aug 2004
| :
|
|
PWR HNGRY 302
¯
Member # 6000
|
posted
Where did you get the magnetic pin from, and how did you take out the bolt if it was still threaded in?
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|
PWR HNGRY 302
¯
Member # 6000
|
posted
I still cant get the pin out, and there is no way to stick pliers in that little hole, I dont have a magnet strong enough to untread the bolt. What could i do i need to pull these axles off.
-------------------- 87 Fox- Restoration in progress 2014 Tacoma DCLB MGM 2017 Prius Prime (The Daily)
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|
mnstruc
¯
Member # 5652
|
posted
the only way I have been able to remove those damn bolts when they break is with a small drill and an easy out. It is a PIA, but I know of no other way to them out. It is very unlikely you will be able to simply break it. Good luck.
-------------------- 63 Fairlane 500 65 GT-1 Mustang Race Car 67 Mustang A code Coupe 68 Ranchero GT 72 Bronco Sport 03 Mustang GT 07 F-350 4x4 Dually Diesel
Posts: 95 | From: Sunnyvale, CA | Registered: May 2005
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
You can cut the cross pin out with a plasma cutter.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
PWR HNGRY 302
¯
Member # 6000
|
posted
quote: Originally posted by JohnB: You can cut the cross pin out with a plasma cutter.
I dont have a plasma cutter , just a big hammer
-------------------- 87 Fox- Restoration in progress 2014 Tacoma DCLB MGM 2017 Prius Prime (The Daily)
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Unless you've got another carrier to replace it with, don't bother. What's left of the broken bolt will damage the carrier if you attempt to pound the cross-pin out.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
93Cobra50
¯
Member # 4602
|
posted
Just get an 8.8
-------------------- 93 Cobra #915, Wont finish itself 95 GT Vert- For Sale 2004 Dodge Ram 3500 Diesel 4x4- Trade for 03 Cobra? 70 ElCamino PROJECT!
Posts: 269 | From: Santa Rosa CA | Registered: Jun 2004
| :
|
|
SPEC -Fabrication
¯
Member # 4980
|
posted
quote: Originally posted by PWR HNGRY 302: quote: Originally posted by JohnB: You can cut the cross pin out with a plasma cutter.
I dont have a plasma cutter , just a big hammer
LOL a big Hammer
-------------------- 1999 Saleen#124 1997 Tahoe 2006 ZX636R CWS certified welder
Posts: 1321 | From: drinkin BEER! | Registered: Oct 2004
| :
|
|
PWR HNGRY 302
¯
Member # 6000
|
posted
quote: Originally posted by JohnB: Unless you've got another carrier to replace it with, don't bother. What's left of the broken bolt will damage the carrier if you attempt to pound the cross-pin out.
All i need from this rear end are the axles i couldn't car less about the rest of it.
-------------------- 87 Fox- Restoration in progress 2014 Tacoma DCLB MGM 2017 Prius Prime (The Daily)
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|
PWR HNGRY 302
¯
Member # 6000
|
posted
quote: Originally posted by 93Cobra50: Just get an 8.8
the axles form the rear end are going into my 8.8 [ April 06, 2006, 01:23 AM: Message edited by: PWR HNGRY 302 ]
-------------------- 87 Fox- Restoration in progress 2014 Tacoma DCLB MGM 2017 Prius Prime (The Daily)
Posts: 2655 | From: SF Bay Area | Registered: Sep 2005
| :
|
|