Author
|
Topic: fuel gauge need removal & reinstall ques.
|
gercolla1
¯
Member # 3068
|
posted
I have to change the resistor behind my fuel gauge. The gauge always reads red empty. Eventually I will have to remove the needle pointer to do the job. When I replace the needle,how do I position/point it now? There is no dowel or notch in either the pin or needle. This needle can be positioned anywhere! How do I establish some type of base-line setting?
-------------------- Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|
166 Merlo
FELONY MOTORSPORTS
Member # 1549
|
posted
do it on a full tank and put it where you want it to be at a full tank.
-------------------- '89 - Boss Coupe '70 - Drop Cutthang '68 - Cougnut '87 - 0166, Its real
Posts: 3953 | From: Thebay | Registered: Jul 2002
| :
|
|
gercolla1
¯
Member # 3068
|
posted
Ya know, I was thinking just that but the opposite, an empty tank. I reason that an empty tank is something to keep a closer eye on. But, that means I have to run the car completely out of gas first.
-------------------- Sf Bay Area
Posts: 2171 | From: Sampan San Francisco | Registered: Jul 2003
| :
|
|