Author
|
Topic: Acceptable size tire for 10.5"x17"
|
CobramanPhil
¯
Member # 2170
|
posted
Just a quick question, but what are the acceptable tire sizes for a 10.5"x17" rear tire of a sn95 mustang? A lot of people put a 315/35/17 sized tire, but there are not a lot of tire brand selections in that size. Is it ok to go for something like a 285/40/17..? What do you guys think???
-------------------- 2013 Shelby GT500 2011 Porsche 911 TurboS/AWD 2014 GSXR750 2002 GSXR750 Track Beater Bike 2016 Explorer Unlimted
Posts: 1016 | From: California, Bay Area | Registered: Dec 2002
| :
|
|
94gt
¯
Member # 3060
|
posted
ive heard of guys using all the way up to 305 or even 315's did you get all your cobra-r stuff yet?
-------------------- 2020 Explorer ST 2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
NO MANRZ
¯
Member # 566
|
posted
The 285 BFG KDW's work great on that size wheel.
-------------------- Bring It . . .
Posts: 1938 | Registered: Nov 2001
| :
|
|
Hungry Hippo
¯
Member # 537
|
posted
most people use 315's but the contact patch with 285's is much better
-------------------- 05 S4 Avant(wagon) 09 C6 H/C/I
Posts: 2959 | From: east bay | Registered: Nov 2001
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote: Originally posted by HungryHippo: most people use 315's but the contact patch with 285's is much better
W/ a 10.5 inch rim
I would think the 315 would have a better contact area vs a 285 ...not too mention more "meat" to protect the lip of the rim(s)however that's personal preference.
If you run a DR you could always use some Nitto 315's as they run a bit smaller than most.
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
RixSikCobra
¯
Member # 5058
|
posted
Got Nitto 285's, they work great, but go with the 315's, I am next time.
-------------------- 2004 Terminator Torch Red Vert Built,Ported,Cammed,Juiced
Posts: 2120 | From: Pleasanton | Registered: Nov 2004
| :
|
|
8850GT
unregistered
|
posted
my buddys got 17x10.5 bullets on his stang and he runs the BFG drag radials in 315-35-17...looks great! 315 all the way!
:
|
|
Hungry Hippo
¯
Member # 537
|
posted
i'm just saying, with a 315 and 32psi, the outer edges barely contact the ground. if you deflate them when you're about to run them, then they'll work better than a 285.
-------------------- 05 S4 Avant(wagon) 09 C6 H/C/I
Posts: 2959 | From: east bay | Registered: Nov 2001
| :
|
|