Author
|
Topic: balancer prob.?????
|
stoauto
¯
Member # 2803
|
posted
first off my car is a 89 5.0 with a new motor....
my problem is my balancer or my crank pully is shaking back and forth, i dont know if the crank pully is not round or if i need to replace my already BRAND NEW STOCK REPLACEMENT BALANCER (which is torqued to spec.), or what, i've never had this problem before, i stared hard at my balancer when the car was on but its hard to determine which is causing the side to side movement, its not going forward and back. the whole motor DOES NOT shake at all just the pully/balancer. the motor runs very smooth, despite this problem. thanks guys.
-Evan
Posts: 1054 | Registered: May 2003
| :
|
|
mtbaughs
Road Racer
Member # 4052
|
posted
Take the belt and the pulley off and fire it up. that should tell ya. Also look for signs of seperation in the balancer when it's off
-------------------- R.I.P. Charlie Bruno Dec 2001
Posts: 2019 | From: Boise, Idaho | Registered: Jan 2004
| :
|
|
mtbaughs
Road Racer
Member # 4052
|
posted
Oh ya, don't run it more than 5 minutes with the belt off.
-------------------- R.I.P. Charlie Bruno Dec 2001
Posts: 2019 | From: Boise, Idaho | Registered: Jan 2004
| :
|
|
stoauto
¯
Member # 2803
|
posted
cool, gotcha, thanks again!
Posts: 1054 | Registered: May 2003
| :
|
|
|