|
Author
|
Topic: Resurrecting a garaged '67 notch
|
Jason
¯
Member # 43
|
posted
 
 
I bought a '67 notch with a 289HP in it last weekend.
The owner had only put about 20k on the current engine before he garaged it in '99.
The good news is, it's got a straight, clean body with a relatively new candy-apple red paint job on it (It matches my L!!). And the interior was well taken care of.
The bad news is, he drained all the fluids out of it when he put it into storage.
Nearly everybody I talk to says that's the worst thing you can do to an engine before you store it....obviously all the fluid lines are going to need to be replaced, as well as the gas tank by now due to corrosion. I'm hoping some of you classic owners might be able to give some advice on any other problems that I should look for as I bring this beast back to life. As well as any good sources for replacement parts.
Thanks for any help you can give!
-Jason
Posts: 128 | From: South Bay | Registered: Jul 2000
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
I had some experience bringing my Ex's '67 fastback to life after being parked for 10 years. I think the thing which gave us the biggest problem was the gas tank. They had left 1/3 of a tank of gas in it, and it turned into something that resembled tanbark. We tried fixing it, but in the end, we just bought a new tank and sending unit. The hardline from the tank to the pump should be okay. I'd unhook both ends, spray quite a bit of brake cleaner in it, the using an air compressor on one end, blow it through the line. Then just replace the hoses and whatnot, you should be okay. I've had an engine sit with no fluids in it for 4 years or so. The guy I sold it to dropped it into his Cougar, fired up and ran with no problems.
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
DropTopFox
drama
Member # 1689
|
posted
quote:
Originally posted by Jason:
I bought a '67 notch with a 289HP in it last weekend.
The owner had only put about 20k on the current engine before he garaged it in '99.
The good news is, it's got a straight, clean body with a relatively new candy-apple red paint job on it (It matches my L!!). And the interior was well taken care of.
The bad news is, he drained all the fluids out of it when he put it into storage.
Nearly everybody I talk to says that's the worst thing you can do to an engine before you store it....obviously all the fluid lines are going to need to be replaced, as well as the gas tank by now due to corrosion. I'm hoping some of you classic owners might be able to give some advice on any other problems that I should look for as I bring this beast back to life. As well as any good sources for replacement parts.
Thanks for any help you can give!
-Jason
![[Eek!]](eek.gif) good luck ![[patriot]](graemlins/patriot.gif)
--------------------
Go out and do something for yourself today everyone, quit depending on others
-Me
http://www.CaliforniaFords.com/cgi-bin/album.pl?album=00001689
Posts: 4003 | From: San Bruno | Registered: Aug 2002
| :
|
|
Fostang
¯
Member # 3752
|
posted
Just wanted to add I have a lot of extra parts that some are very low milaged ones others are in very good condition for your stang. Since I'm going all new for mine.
Disc brakes, gas tank, lines, rear, etc. etc.
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
chosen1
¯
Member # 1906
|
posted
ive worked on lots of older mustangs that had sat for a while. mine being one of them when i first got it. i considered myself lucky because i didnt have powersteering. but the thing that needed immediate replacement was the brake system. new wheel cylinders, shoes, pads, etc.
the gas line should be fine, just clean it. you'd probably want to drain the gas; tank should have a drain in the front right lower corner. if it doesnt, pull the sending unit out. its in the front on the bottom.
you can get a front end suspension rebuilt kit for pretty cheap, and the pieces go in as easy as a puzzle.
--------------------
1967 Fastback. Should go 10's -but doesn't
1993 Cobra
2003 Suzuki SVS
1966 Coupe -For Sale
Posts: 2205 | Registered: Sep 2002
| :
|
|
Jason
¯
Member # 43
|
posted
Thanks for the replies, everybody.
I spoke with the owner again and I guess I misunderstood him the first time we spoke. He mentioned that he only drained the gas and the oil out of it, even then he dumped all new oil in it about 6 months after draining it and hasn't cranked it since.
The engine needs a little work to get it running again, but now I'm looking for a front disc conversion kit for it. Does anybody know where to find one, locally if possible?
-Jason
Posts: 128 | From: South Bay | Registered: Jul 2000
| :
|
|
chosen1
¯
Member # 1906
|
posted
contact Foxbody. He has one for $250 I think.
--------------------
1967 Fastback. Should go 10's -but doesn't
1993 Cobra
2003 Suzuki SVS
1966 Coupe -For Sale
Posts: 2205 | Registered: Sep 2002
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
