|
Author
|
Topic: parts list needed for s/c install
|
the50ho
THE50HO
Member # 73
|
posted
 
 
Alright, time is creeping up. Putting an ati on my 98 cobra, and have a few questions.
What all will I need??
-42# injectors (Already Have)
-Mass Air meter (Already Have)
-255 in tank
-In line pump (Already Have)
-Chip (have an unburned one already, should I have one made close to tune for the drive to the dyno tune???)
-Fuel pressure regulator
So, what else will I need???
Please help, I'm stoked and want to make sure everything is here and ready when the time comes!
--------------------
Too many motorcycles...and now a destroyed arm from Motocross...brrraaappp
Posts: 4056 | From: Roseville, Ca (Sacramento) | Registered: Nov 2000
| :
|
|
66 AC COBRA
Nitrous King
Member # 904
|
posted
a power pipe is always nice
having a spare belt is nice insurance
--------------------
FFR AC Cobra
72 Vega - WCHRA Extreme 10.5
Posts: 6280 | From: Winters | Registered: Feb 2002
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
TR6 plugs?
[ October 29, 2003, 04:46 PM: Message edited by: Black94 5.0 ]
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
98slowhoe 'FIFTYLX'
Uncle Frank
Member # 895
|
posted
yeah make sure you have the right spark plugs that are gaped correctly for the boost and maybe a MSD ignition box or something similar.
You don't need that chip burnt for the drive out there, just make sure you have good fuel pressure less timing and DON'T GET ON IT!!!
--------------------
AKA Franky Freaking 5 liter
Advanced Engine Development
SCT dealer
Dynotuning
Engine building
916*275*8212
88 4runner on 42's
Posts: 4206 | From: Folsom | Registered: Feb 2002
| :
|
|
91 5.0
¯
Member # 1527
|
posted
Yeah, just dont get on it on the way to the dyno. If your ignition is stock, you'll want to gap your plugs a bit smaller too. ~.032 works pretty well on my combo. That is also what Vortech recommends, I believe. ![[patriot]](graemlins/patriot.gif)
--------------------
02 GT - Zinc Yellow
91 5.0 LX - Red
Posts: 1316 | From: Fairfield | Registered: Jul 2002
| :
|
|
91 5.0
¯
Member # 1527
|
posted
The PCV system may need to be changed around a bit too. With a blower car, you can potentially pressurize the crankase. This of course causes oil to start blowing out everywhere. I would also make sure you have this stuff set up right before boosting the motor.
--------------------
02 GT - Zinc Yellow
91 5.0 LX - Red
Posts: 1316 | From: Fairfield | Registered: Jul 2002
| :
|
|
Rob [5LVENOM]
¯
Member # 2282
|
posted
Fuel pressure guage, powerpipe, and a good belt tensioner. Oh yeah, breathers for sure, and I run a one way check valve inline with the pcv.
[ October 30, 2003, 02:43 PM: Message edited by: 5LVENOM ]
Posts: 421 | Registered: Jan 2003
| :
|
|
91 5.0
¯
Member # 1527
|
posted
quote:
Originally posted by 5LVENOM:
Fuel pressure guage, powerpipe, and a good belt tensioner. Oh yeah, breathers for sure, and I run a one way check valve inline with the pcv.
im not sure all that is necessary. Just make sure you re-route all your pcv lines.
[ October 31, 2003, 08:32 AM: Message edited by: 91 5.0 ]
--------------------
02 GT - Zinc Yellow
91 5.0 LX - Red
Posts: 1316 | From: Fairfield | Registered: Jul 2002
| :
|
|
Saint
¯
Member # 2746
|
posted
lol when i first put my blower on i didnt regap the spark plugs and on my way home i got on it and my car died cause it blow out the spark
Posts: 239 | From: Antioch | Registered: Apr 2003
| :
|
|
Rob [5LVENOM]
¯
Member # 2282
|
posted
Yep and mine did it at 5000 rpms on the dyno with a gap of .32 sucked. MSD6AL
Posts: 421 | Registered: Jan 2003
| :
|
|
91 5.0
¯
Member # 1527
|
posted
quote:
Originally posted by 5LVENOM:
Yep and mine did it at 5000 rpms on the dyno with a gap of .32 sucked. MSD6AL
![[Eek!]](eek.gif) Even with an MSD box? How much boost were you running?
[ October 31, 2003, 10:22 AM: Message edited by: 91 5.0 ]
--------------------
02 GT - Zinc Yellow
91 5.0 LX - Red
Posts: 1316 | From: Fairfield | Registered: Jul 2002
| :
|
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
