Author
|
Topic: 302 H.O. vs an older 302
|
sharkattack
¯
Member # 645
|
posted
What makes a 5.0 an HO vs a non HO 302?
-------------------- 1965 Fastback
03 Cobra with some stuff
Posts: 935 | From: Oakley Ca | Registered: Dec 2001
| :
|
|
4RS FED
¯
Member # 2067
|
posted
quote: Originally posted by sharkattack: What makes a 5.0 an HO vs a non HO 302?
i am going to go out on a limb here and say the cam is different (not a roller, smaller specs, and possibly different firing order) and compression
-------------------- i have a twin turbo mustang and you don't!
Posts: 3686 | From: 650 | Registered: Nov 2002
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Cam Firing Order Distributor drive gear Compression Forged vs. Cast pistons (depending on year) And if it's an older 302, the balance of the engine.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
sharkattack
¯
Member # 645
|
posted
quote: Originally posted by JohnB: Cam Firing Order Distributor drive gear Compression Forged vs. Cast pistons (depending on year) And if it's an older 302, the balance of the engine.
JohnB thank you for the help. You helped with my firing order ? also. So is it safe to say that I have an H.O. with the following
E303 roller cam Steel dist. drive gear (because of the roller cam) 10 to 1 compression Probe pistons 50oz balancer with matching flexplate. I am just trying to confirm my firing order is correct.
the motor is new from DSS. I guess I could just call them but trying to figure this out quickly
-------------------- 1965 Fastback
03 Cobra with some stuff
Posts: 935 | From: Oakley Ca | Registered: Dec 2001
| :
|
|
166 Merlo
FELONY MOTORSPORTS
Member # 1549
|
posted
My car was runnign like shit because I had it set up for the H.O firing order when I first fired it up. I didn't know and when I switched it to the non H.O, it was quite orgasmic to hear it run.
VrooOOOM mutha fuckuh!
-------------------- '89 - Boss Coupe '70 - Drop Cutthang '68 - Cougnut '87 - 0166, Its real
Posts: 3953 | From: Thebay | Registered: Jul 2002
| :
|
|
jph331
¯
Member # 665
|
posted
Cam is what dictates the firing order. Your firing order would be 13726548.
Posts: 338 | From: Concord | Registered: Dec 2001
| :
|
|