|
Author
|
Topic: tires and wheels
|
slow&poor
¯
Member # 961
|
posted
 
 
I want to get new tires and wheels for my '92 GT, but don't know what will fit. What I would like to get is 15x7 Weld draglites in the font with 215/50/15 tires and get 15x8 Weld Draglites in the rear with 275/60/15 tires. I would bet Goodyear T/A for tires in the front and rear.Do you guys think this is a good set up? Will everything fit without rubbing? If not, what is the biggest tire i can fit? Thanx
--------------------
1992 Mustang GT: Stolen 4/23/03
1993 Mustang GT:
Performance:
AFR 165 pedestal mount 60cc heads, Crane 1.7 Roller Rockers, FRPP EFI Valve Covers, Cobra Intake Manifold, BBK 3/8 Phenolic Spacer, FMS 65mm TB, C&L 76mm Mass Air Meter, BBK Fenderwell Cold Air Intake, BBK 1 5/8" Jet-Hot Shorty Headers, Bassani 2.5" X-Pipe w/ Cats, FMS 3.73 Ring and Pinion Gears, Flowmaster 2 Chamber Mufflers, BBK Aluminum Underdrive Pulleys, B&M Supercooler, PA Full Manual Valve body w/ Trans Brake, TCI Street Fighter Lock up Converter, PA Performance 3G Alternator, FMS Aluminum Driveshaft, Kirban Billet Fuel Pressure regulator, Hurst Quarter Stick
Handling:
MM Standard Length Subframe connectors, MM 4 Point K-Member Brace, MM Strut Tower Brace, Saleen Progressive Rate Lowering Springs, Koni Yellow Shocks, Pro3i Street/Strip LCA's w/ weight jackers
Performance:
*13.27 seconds ¼ mile time
*104mph traps
Posts: 159 | From: San Mateo | Registered: Mar 2002
| :
|
|
Stimson
_
Member # 51
|
posted
Everything should fit fine, but the rear will be very close. You'll have to at the very least flip the quad shocks, or even remove them all together. You probably want 225/60/15's in the front so the sidewall height matches the front.
Posts: 2373 | Registered: Jun 2000
| :
|
|
slow&poor
¯
Member # 961
|
posted
What do you think is the biggest tire i could fit in the rear without having to do any modifications?
--------------------
1992 Mustang GT: Stolen 4/23/03
1993 Mustang GT:
Performance:
AFR 165 pedestal mount 60cc heads, Crane 1.7 Roller Rockers, FRPP EFI Valve Covers, Cobra Intake Manifold, BBK 3/8 Phenolic Spacer, FMS 65mm TB, C&L 76mm Mass Air Meter, BBK Fenderwell Cold Air Intake, BBK 1 5/8" Jet-Hot Shorty Headers, Bassani 2.5" X-Pipe w/ Cats, FMS 3.73 Ring and Pinion Gears, Flowmaster 2 Chamber Mufflers, BBK Aluminum Underdrive Pulleys, B&M Supercooler, PA Full Manual Valve body w/ Trans Brake, TCI Street Fighter Lock up Converter, PA Performance 3G Alternator, FMS Aluminum Driveshaft, Kirban Billet Fuel Pressure regulator, Hurst Quarter Stick
Handling:
MM Standard Length Subframe connectors, MM 4 Point K-Member Brace, MM Strut Tower Brace, Saleen Progressive Rate Lowering Springs, Koni Yellow Shocks, Pro3i Street/Strip LCA's w/ weight jackers
Performance:
*13.27 seconds ¼ mile time
*104mph traps
Posts: 159 | From: San Mateo | Registered: Mar 2002
| :
|
|
PunkINa5.SLOW
¯
Member # 10
|
posted
I think 265/60/15 is about it with no worries.
--------------------
OUTTA THA DRAMA
R.I.P. MIKE STARKEY MY BABY BROTHER
12/8/77-5/17/03
Posts: 2495 | From: MTZ | Registered: Sep 2000
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
