Author
|
Topic: Who said Friday the 13th was bad???
|
TRIXSNK
¯
Member # 2844
|
posted
Had a great night at TNT.
Reminded me of the TNT of old having fun with a lot of friends
Finally got the Cobra running well and was able to not only back up my runs but kept them all pretty consistant.
Run #1 - 1.698 60 ft
- 7.267 1/8 @ 98.601 mph
- 11.251 1/4 @ 125.693 mph
Run#2 - 1.648 60 ft
- 7.302 1/8 @ 98.181 mph
- 11.302 1/4 @ 125.054 mph
Run#3 - 1.640 60 ft
- 7.963 1/8 @ 70.977 mph
TRIED TO POWERSHIFT 2-3 AND MISSED
Run#4 - 1.608 60 ft
- 7.225 1/8 @ 100.659 mph
- 11.230 1/4 @ 125.26 mph
Funny thing the best pass #4 came after hot-lapping the car with only a 5 min cool down w/o ice etc.
To top all that off check out the Street Racing section
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
twisted54
¯
Member # 1981
|
posted
Nice runs Patrick...
Posts: 3421 | From: ebay | Registered: Oct 2002
| :
|
|
stangless
¯
Member # 1414
|
posted
friday the 13th wasn't good for me.. clutch would engage and then slip constantly throughout the night.. a whole bunch of 13.4s.. with a best of 13.40 and a 13.5 and a 13.6 on my last one where i could not get the car into 4th.. Time for a new cluch..
wait wait.. nevermind. i got to see patrick race two bad ass cars on the way back! can't beat that..
-------------------- =(
Posts: 4634 | From: bay | Registered: Jun 2002
| :
|
|
SVTGhoust
¯
Member # 20
|
posted
nice 60fts patrick, is this on the IRS?
-------------------- 2013 Shelby GT500 / 2020 Shelby GT500
Posts: 962 | From: Brentwood, CA 94513 | Registered: Oct 2000
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote: Originally posted by Lilghoust: nice 60fts patrick, is this on the IRS?
Yup...stock shafts, IRS brace, 17" MT DR's.
Did you get the BAP already.
I talked to my buddy at the track but they were partying that night and haven't spoken with him yet.
We should be able to get the blower swapped this week.....so you can come up to race on the weekend [ October 15, 2006, 08:43 PM: Message edited by: TRIXSNK ]
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
losbadgts
¯
Member # 4394
|
posted
quote: Originally posted by Jmir018: friday the 13th wasn't good for me.. clutch would engage and then slip constantly throughout the night.. a whole bunch of 13.4s.. with a best of 13.40 and a 13.5 and a 13.6 on my last one where i could not get the car into 4th.. Time for a new cluch..
wait wait.. nevermind. i got to see patrick race two bad ass cars on the way back! can't beat that..
Let me know when ever u want to do the new clucth install? u know i'm always down do help u out.
-------------------- Why pretent someone u are not, everyone else could see it.
Posts: 3625 | From: redwood city | Registered: Apr 2004
| :
|
|
03SVTPower
CAFords OG
Member # 518
|
posted
Good stuff Patrick, good to hear you're back in the cobra saddle again and tearing up the 1/4. Good times!
-------------------- 2003 Redfire "AED" Cobra R.I.P
Posts: 3481 | From: Nor-Cal | Registered: Oct 2001
| :
|
|
cummins
¯
Member # 5931
|
posted
Does that irs brace help??? Can you still squat with it?
-------------------- Your definitely jealous of my strength and brains. - 68_427_Fastback
Cummins looks like the Wendy's girl......without the pig tails. - JT
Posts: 3441 | From: The Rice Fields | Registered: Aug 2005
| :
|
|
SVTGhoust
¯
Member # 20
|
posted
the irs brace definately helps keep the rear end together. But it doesnt do anything for the stock halfshafts.
I few months back when I first got my D/Rs, I launched hard at infineon and snapped my left halfshaft before I drove 60 feet...
-------------------- 2013 Shelby GT500 / 2020 Shelby GT500
Posts: 962 | From: Brentwood, CA 94513 | Registered: Oct 2000
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
Ryan - Thanks man it feels good.....but now it's time for some 10's
Cummins - Can't feel a diff. with the brace just to hold the POS cover together. Mt car doesn't really squat hard (Steeda springs) but it does feel like it's transferring the wieght well. Haven't seen the vids yet.
Lilghoust - I didn't know you snapped a shaft What tires, rpm, slip vs. dump
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|
cummins
¯
Member # 5931
|
posted
oh ok I thought that they may be strut braces to help hold camber steady and prevent the tires from tucking up at an angle. Wrong irs brace I guess. I'm on irs and I'm always looking at ways to lower my 60 they just aren't good enough.
-------------------- Your definitely jealous of my strength and brains. - 68_427_Fastback
Cummins looks like the Wendy's girl......without the pig tails. - JT
Posts: 3441 | From: The Rice Fields | Registered: Aug 2005
| :
|
|
TRIXSNK
¯
Member # 2844
|
posted
quote: Originally posted by cummins: oh ok I thought that they may be strut braces to help hold camber steady and prevent the tires from tucking up at an angle. Wrong irs brace I guess. I'm on irs and I'm always looking at ways to lower my 60 they just aren't good enough.
To be honest i don't launch the car hard enough to cause tucking probs maybe with more HP and bigger nutz.....but i don't own a trailer or tow vehicle......YET!
-------------------- 9 Sec EVO 9 is GONE!
New project in the works.......
Posts: 3740 | From: Bay Area | Registered: May 2003
| :
|
|