|
Author
|
Topic: Paint job
|
Thatfoxy50
¯
Member # 13920
|
posted
 
 
Who knows where I can get a paint job for a hood for cheap and fast?
[ 2015-08-05, 10:06 PM: Message edited by: Thatfoxy50 ]
Posts: 124 | From: Burlingame | Registered: Jan 2015
| :
|
|
351w
¯
Member # 11875
|
posted
Hit up 90gtsleeper
Posts: 1018 | From: 510 | Registered: Apr 2012
| :
|
|
Robb
¯
Member # 9444
|
posted
Fast and cheap? Yep, sounds like a job for 90gtsleeper.
Posts: 2467 | From: Sacramento,CA | Registered: Sep 2009
| :
|
|
RRRCobraSC281
¯
Member # 7086
|
posted
Do yourself a favor and find someone local. If not I know someone in San Lorenzo that can do it for cheap and fast.
Actual address is
2 Lewelling Blvd
San Lorenzo, CA 94580
[ 2015-08-06, 08:55 PM: Message edited by: RRRCobraSC281 ]
--------------------
Project 93GT500 has started
90 Coyote Coupe (sold)
88 Mach 1 Coupe MM&FF 6/14 (sold)
65 FFR Cobra (sold)
Posts: 1746 | From: Fremont, CA | Registered: Sep 2006
| :
|
|
Thatfoxy50
¯
Member # 13920
|
posted
Right on guys!
Posts: 124 | From: Burlingame | Registered: Jan 2015
| :
|
|
RRRCobraSC281
¯
Member # 7086
|
posted
Juan Hernandez 510-717-2101
--------------------
Project 93GT500 has started
90 Coyote Coupe (sold)
88 Mach 1 Coupe MM&FF 6/14 (sold)
65 FFR Cobra (sold)
Posts: 1746 | From: Fremont, CA | Registered: Sep 2006
| :
|
|
Saleenssc14
¯
Member # 7791
|
posted
Is the quality from him acceptable Robert? Asking because I need a roof painted and don't want to pay an arm and a leg, but at the same time I want reasonable quality
--------------------
Carlos Munoz
Posts: 1156 | From: Union City | Registered: Jul 2007
| :
|
|
|
|
Fostang
¯
Member # 3752
|
posted
Just do it yourself. ![[Cool]](cool.gif)
This is my first time doing this work and find it this far remarkably easy to lay. The work is all in the block sanding. But a little feather fill g2 and this thing blocks out razor straight.
Contrary to popular belief it is not illegal to paint at home epa allows for 2 vehicles per year as long as you are not doing it for profit.
[ 2015-10-13, 10:48 PM: Message edited by: Fostang ]
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
RRRCobraSC281
¯
Member # 7086
|
posted
quote:
Originally posted by Fostang:
Just do it yourself.
This is my first time doing this work and find it this far remarkably easy to lay. The work is all in the block sanding. But a little feather fill g2 and this thing blocks out razor straight.
Contrary to popular belief it is not illegal to paint at home epa allows for 2 vehicles per year as long as you are not doing it for profit.
Actually if you have neighbors that have a problem with you painting, they can call the city on you. Atleast in Fremont they told me that I couldn't use compressed air to spray paint. So i asked them, "What about a spray can?" They said that was fine, but using a compressor to spray paint is against the CCR.
Can't even dismantle cars in Fremont.
You can do the following to your car:
Change the wheels.
Swap out motors.
Change transmission.
Swap out car parts.
Remove the interior.
But not all at the same time.
[ 2015-10-13, 11:39 PM: Message edited by: RRRCobraSC281 ]
--------------------
Project 93GT500 has started
90 Coyote Coupe (sold)
88 Mach 1 Coupe MM&FF 6/14 (sold)
65 FFR Cobra (sold)
Posts: 1746 | From: Fremont, CA | Registered: Sep 2006
| :
|
|
Fostang
¯
Member # 3752
|
posted
Right right.
Each city can have its municipal ordinances. (Or county)
However most are bs fines $150 bucks or so with a 15 day seize order. I'd pay the fine and keep spraying for those 15 days. Fed fines are the one that can run 10-15k. But since they have exemptions for that then you're in the clear.
In addition to this I have only seen a handful of cities or counties that specifically target compressed air spraying. Most just brush on the subject of auto repair as a business in your residence. They don't want 10 broken down cars around your property.
Most are complaint oriented and if you do a double filtration exhaust it should capture most of the odor.
[ 2015-10-14, 06:57 AM: Message edited by: Fostang ]
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
i
¯
Member # 12534
|
posted
quote:
Originally posted by Fostang:
Just do it yourself.
This is my first time doing this work and find it this far remarkably easy to lay. The work is all in the block sanding. But a little feather fill g2 and this thing blocks out razor straight.
Contrary to popular belief it is not illegal to paint at home epa allows for 2 vehicles per year as long as you are not doing it for profit.
You look like a pro Lola. That's a nice set up for your garage.
I agree, with neighbors are some noisy ass people I swear.
Posts: 1901 | From: Sacramento | Registered: Nov 2012
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
So you just used PVC piping, plastic and home heater filters? Just wondering because it looks like a decent setup.
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18529 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
Fostang
¯
Member # 3752
|
posted
Yes sir.
This one I built with 1" schedule 40. Next I would do with at least 1.25 so it doesn't bow as bad.
Some 6mill plastic. Heater filters. 2 box fans for exhaust zipper entrance with 2x4 to pinch off the bottom to floor seal. Two packs of duck tape and the thing seals nicely.
I put the intake filters 4 20x30 on the top and the exhaust 2 double 20x30 with fan pulling air out of room. Clears it in no time plus being intake is on top and exhaust on bottom it brings the overspray to the floor and not on the stuff your spraying.
My guns are tcp 1.8 for high build 1.4 for sealers. Base and clear a devilbiss plus 1.2 1.3 or 1.4 kit.
Tyvex suit. Sealed goggles. Heavy gloves. Hobby air fresh air kit. I don't believe in carbon filters for long exposure times. The hobby air is in my compressor room that's out of the garage. It's ran into the garage where I plug into by 3/4 pvc.
The compressor is a Quincy 60gal 5hp 2 stage. Has filtered IR regulator. Goes into 3/4 copper tubing that is about 30ft long with 3 water traps with drains along the way. From there it goes into a desiccant filter right into the pvc/rubber hose to keep it from kinking. The guns have a particulate filter and regulator. So far I have gotten zero air contaminants.
Oh and I usually run the air conditioner in the garage while I'm spraying to lower the humidity level and make sure the air coming in is about 75-77*.
[ 2015-10-14, 08:10 AM: Message edited by: Fostang ]
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
75 chevy
¯
Member # 6717
|
posted
I have heard of turbine units for approx. $1500... never tried it, don't know anyone that has tried. Although- I would try it if I had to!!!
This is the company I'd go with...
http://www.lexaire.com/
Posts: 1917 | From: california | Registered: Apr 2006
| :
|
|
Eddie510-
CAFords OG
Member # 2354
|
posted
Nice!!
--------------------
"I like to be more politicaly correct than what I really believe so I can get more frinds here on CaFords"-Cummings "TIPICKLE"
Posts: 6556 | Registered: Jan 2003
| :
|
|
408LIGHTNING
¯
Member # 7447
|
posted
Hey man just wondering what kinda paint you use to paint your car. Was it a solvent based or new water based type paint? I'm looking into doing my own paint too just want sure if you can spray clear without backing it. Any answer would help thanks.
--------------------
**R.I.P Willie Guzman 5LTRSVT**
1988 lx hatch
2000 ford lightning
2007 sonic blue ZR1
Posts: 527 | From: san jose | Registered: Feb 2007
| :
|
|
mikeP
¯
Member # 4489
|
posted
quote:
Originally posted by Fostang:
Just do it yourself.
This is my first time doing this work and find it this far remarkably easy to lay. The work is all in the block sanding. But a little feather fill g2 and this thing blocks out razor straight.
Contrary to popular belief it is not illegal to paint at home epa allows for 2 vehicles per year as long as you are not doing it for profit.
tight bro!
--------------------
91 vert lx 5.0, 68 CS, 69 BB nova
Posts: 975 | Registered: May 2004
| :
|
|
Fostang
¯
Member # 3752
|
posted
I've been using solvent based products.
Since I'm not a pro nor do I have a perfect booth it tends to spray easier.
Not as sensitive to humidity or air supply cleanliness.
Solvent based paint sprays thick. Helping hide some of the imperfections I may have left in the body work. It's not unheard of people spraying right on 400grit sand scratches and not seeing a difference if the color is solid. But with a waterborne you better sand it razor flat to 800grit otherwise all those sanding scratches are gonna pop back up
The equipment is usually cheaper too. Where as my gun was roughly 360 bucks the one for waterborne paint would be about about double that amount.
There's also a lot of more info about solvents based paints sprayed by a DIY kind of person.
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
Fostang
¯
Member # 3752
|
posted
All done with that truck
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
phildog
¯
Member # 1214
|
posted
Great job! I love a homebuilt project!
Posts: 1554 | From: 510 | Registered: Apr 2002
| :
|
|
Built88LX
¯
Member # 10758
|
posted
That turned out great nice work bro
Posts: 2390 | From: $acramento | Registered: Mar 2011
| :
|
|
Fostang
¯
Member # 3752
|
posted
Thanks it was defiantly an experience.
To think 5 months ago I started on this project.
Did a complete ground up powder coated everything fuel injected air conditioned 4 wheel power disc brakes
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
Black 02 SS
¯
Member # 5939
|
posted
I can tell it is a very clean resto and I still respect first gen SBC but out of curiosity, why not go with at least a 5.3 truck engine? Given their affordability, reliability, and MPG. I love a RCSB, especially in white so I'm not hating. Just curious ![[Smile]](smile.gif)
--------------------
Schwinn 18speed
Posts: 949 | From: East Bay | Registered: Aug 2005
| :
|
|
Fostang
¯
Member # 3752
|
posted
Just in headers,oil pan, motor mounts, adapters for steering lines and brackets for sanden your in about 1,500 bucks plus a rebuilt 5.3 still gonna run you about 2k and there's a need for wiring computer tune the rest of the accessories including water pump balancer pulley alternator and steering pump.
This whole set up rebuilt 355 lunati cam 7qt pan edelbroxk heads 1.6 roller rockers headers fuel injection wiring computer intake all pulleys with polished sanden was had for about 3500 new.
Plus the owner wanted 350 powered. Then comes the hp output. This set up thanks to the tpi will prob do about 260/360. A stock 5.3 will do about 260/260. Now if you sink another $800 in springs timing chain oil pump and cam with lifters it will do about 330/330 since it would prob have longtube swap headers.
Long explanation sorry lol. But we did make calculations for everything. The owner wanted a 100% new set up so even though I have 2 spare ls 6.0 engines he wanted the 350. Lucky for me I had 85% of the parts on hand so it was a no brainer.
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
![[worship]](graemlins/worship.gif)
