|
Author
|
Topic: having a motor built
|
LXjames
¯
Member # 10791
|
posted
 
 
Decided on a 351w for my 86, block is an a351 block. Plenty of meat to make the power I want.
I don't build motors, don't pretend to. So I don't have these pre determined specs and parts I want in the motor. Do the machine shops that assemble motors specialize in ground up stuff like this? (Meaning a customer doesn't know what rods, pistons, crank to run for desired compression and power goals). If so who can I take this motor to and they just use my budget, goals, and their skills to make it happen?
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
I got my motor done at Morgan's Machine & Marine in Walnut Creek. Tim who runs the place has been building engines since before you and I were born. He's an awesome guy and spent a good hour showing me around the shop and going over what my goals and budget were. He talked me out of some stuff I thought I wanted after he explained how much it would cost to do the machine work and why it took that many hours. I brought him a block and crank and he did the rest.
Here's a story about Tim.
http://www.partsandpeople.com/precision-expertise-and-reputation-keep-morgan%E2%80%99s-machine-%E2%80%88marine-demand
[ 2015-12-08, 06:47 PM: Message edited by: wilit ]
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
70stang351w
¯
Member # 9948
|
posted
quote:
Originally posted by LXjames:
Decided on a 351w for my 86, block is an a351 block. Plenty of meat to make the power I want.
I don't build motors, don't pretend to. So I don't have these pre determined specs and parts I want in the motor. Do the machine shops that assemble motors specialize in ground up stuff like this? (Meaning a customer doesn't know what rods, pistons, crank to run for desired compression and power goals). If so who can I take this motor to and they just use my budget, goals, and their skills to make it happen?
They should that might be the best option I've been planning the same with my current 351w getting all the parts together. what 351w block did you go with roller or non roller.
can a 351w swap be smog legal Besides a cobra r which the stock parts are expensive as hell for being stock; i dont have to worry about that with my 70; just wondering for a foxbody?
--------------------
1996 GT VERT /32v MOD - SOLD
1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
RiddlerGT
Midnight King
Member # 113
|
posted
Borello Tony Racing Engines Is very popular with the Shelby guys. He makes some amazing motors.
Morgan speed and marine is good as well.
Posts: 2292 | From: San Ramon | Registered: Dec 2000
| :
|
|
3cRider
¯
Member # 10052
|
posted
John Rankin at Rankin Performance Machine is by far one of the best I've ever seen. He normally builds $100,000 Packard, Dusenberg (sp?) and other high-end obscure motors that are irreplaceable if it's broken, so he has to do it right every time, but he's always building awesome Modular fords, SBFs, LS, SBC, big blocks, you name it.
More info:
https://www.facebook.com/RankinPerformanceMachine/
[ 2015-12-08, 07:28 PM: Message edited by: 3cRider ]
Posts: 91 | Registered: Jun 2010
| :
|
|
LXjames
¯
Member # 10791
|
posted
quote:
Originally posted by 70stang351w:
quote:
Originally posted by LXjames:
Decided on a 351w for my 86, block is an a351 block. Plenty of meat to make the power I want.
I don't build motors, don't pretend to. So I don't have these pre determined specs and parts I want in the motor. Do the machine shops that assemble motors specialize in ground up stuff like this? (Meaning a customer doesn't know what rods, pistons, crank to run for desired compression and power goals). If so who can I take this motor to and they just use my budget, goals, and their skills to make it happen?
They should that might be the best option I've been planning the same with my current 351w getting all the parts together. what 351w block did you go with roller or non roller.
can a 351w swap be smog legal Besides a cobra r which the stock parts are expensive as hell for being stock; i dont have to worry about that with my 70; just wondering for a foxbody?
While I don't like the possible harassment and issue of finding a smog plug, I'm not really concerned about the illegality of the swap. But to answer your question to the best of my knowledge, unless it's a complete cobra r swap (95) or maybe a completely stock swap over with all the smog and egr bs. It won't pass. Maybe a dumb smog tech won't trip if your lucky.
As for my motor, it's the ford Motorsport a351 which is roller block. Svo 351 block. I WANT to do a single turbo but have no idea the cost so until I get math and numbers for that total cost I just want the block built to be boost friendly.
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
California street machine 8n Fairfield or Dave's machine in newerk. The build some of the fastest engines in northern California.
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
LXjames
¯
Member # 10791
|
posted
quote:
Originally posted by hurting your feelings:
California street machine 8n Fairfield or Dave's machine in newerk. The build some of the fastest engines in northern California.
I'm a huge fan of Dave and Angie's work! Went to their shop and was just floored at what they work on over there. I might give them a call tomorrow
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
phildog
¯
Member # 1214
|
posted
Turbo50. Best hands down.
Posts: 1554 | From: 510 | Registered: Apr 2002
| :
|
|
LXjames
¯
Member # 10791
|
posted
quote:
Originally posted by phildog:
Turbo50. Best hands down.
He built good ass motors. Whether or not you got played or played yourself isn't my issue. I have one of his motors still running strong. Anyways......
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
Fostang
¯
Member # 3752
|
posted
It's a SBF you are overthinking any half ass machine shop can build those turds.
Having said that. http://comptechusa.com
These guys built my last "new" motor
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
Eddie510-
CAFords OG
Member # 2354
|
posted
quote:
Originally posted by LXjames:
quote:
Originally posted by hurting your feelings:
California street machine 8n Fairfield or Dave's machine in newerk. The build some of the fastest engines in northern California.
I'm a huge fan of Dave and Angie's work! Went to their shop and was just floored at what they work on over there. I might give them a call tomorrow
Well there you have it ..Answered your own question
[ 2015-12-08, 10:46 PM: Message edited by: Eddie510- ]
Posts: 6556 | Registered: Jan 2003
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote:
Originally posted by LXjames:
quote:
Originally posted by hurting your feelings:
California street machine 8n Fairfield or Dave's machine in newerk. The build some of the fastest engines in northern California.
I'm a huge fan of Dave and Angie's work! Went to their shop and was just floored at what they work on over there. I might give them a call tomorrow
Dave's Machine is not in Newark anymore. I had them repair a head I have and they told me if I needed anything else done they were going to move to like Tracy I think.
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18529 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
LXjames
¯
Member # 10791
|
posted
quote:
Originally posted by NEIGHT:
quote:
Originally posted by LXjames:
quote:
Originally posted by hurting your feelings:
California street machine 8n Fairfield or Dave's machine in newerk. The build some of the fastest engines in northern California.
I'm a huge fan of Dave and Angie's work! Went to their shop and was just floored at what they work on over there. I might give them a call tomorrow
Dave's Machine is not in Newark anymore. I had them repair a head I have and they told me if I needed anything else done they were going to move to like Tracy I think.
Shit that's better than Newark for me 😁 I gotta look them up.
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
Lloyd engineering in Oakley is who I've used in the past.
--------------------
"The clutch is on the left. Gas on the right."
"What's this one in the middle?"
"It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
fiftwyz
¯
Member # 8351
|
posted
Didnt you want to put a ls motor in your car?
Posts: 679 | From: sunnyvale | Registered: Apr 2008
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote:
Originally posted by fiftwyz:
Didnt you want to put a ls motor in your car?
Don't question it. You've been on the site long enough to know he can't ever make up his mind in anything. I like this idea over the LS though.
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18529 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
