Author
|
Topic: opinions
|
1RaW03SvT
¯
Member # 9151
|
posted
2.65 pulley what does it require [ May 01, 2012, 11:13 PM: Message edited by: 1RaW03SvT ]
-------------------- 2003 SoNiC BlUe CoBrA BUILT
Posts: 2159 | From: *SVTaDDicT* | Registered: May 2009
| :
|
|
fstryde3
¯
Member # 8436
|
posted
- [ May 01, 2012, 11:44 PM: Message edited by: fstryde3 ]
Posts: 2950 | From: Sacramento | Registered: Jun 2008
| :
|
|
1RaW03SvT
¯
Member # 9151
|
posted
lol i edited post cause i need to resize pics lol
what is required for a 2.65 pulley!! do you have to machine the snout of the blower!!
-------------------- 2003 SoNiC BlUe CoBrA BUILT
Posts: 2159 | From: *SVTaDDicT* | Registered: May 2009
| :
|
|
StreakMatt
¯
Member # 6257
|
posted
Looking sick Cory. Those are some awesome shots. I need to set up a photoshoot with your buddy!
-------------------- Custom Blue '88 GT: Garage Built= MM&FF January 2012 Cover and Feature. Tuned by Bob Kurgan Black '03 Cobra: 2.9 Whipple Tuned by Bob Kurgan
Posts: 1198 | From: Sacramento | Registered: Nov 2005
| :
|
|
SSSSIKH
¯
Member # 8397
|
posted
No grinding required!...the reichard racing one that lethal sells is the one u want.
-------------------- AED WWW.AEDHP.COM
Posts: 895 | From: San Jose | Registered: May 2008
| :
|
|
2T0NE
Go 49ers
Member # 4216
|
posted
quote: Originally posted by SSSSIKH: No grinding required!...the reichard racing one that lethal sells is the one u want.
so reichard racing is the only one that works? do you need a tune after?
-------------------- Originally posted by x Raelsmar x: Can't wait till the Giants lose tomorrow night so all you Giants fans are forced to shut the fuck up.
Posts: 14676 | From: 760 carlsbad | Registered: Mar 2004
| :
|
|
SSSSIKH
¯
Member # 8397
|
posted
quote: Originally posted by 2T0NE: quote: Originally posted by SSSSIKH: No grinding required!...the reichard racing one that lethal sells is the one u want.
so reichard racing is the only one that works? do you need a tune after?
The reichard racing pulley is the only one I have personal experience with. And yes I would recommend a tune after.
-------------------- AED WWW.AEDHP.COM
Posts: 895 | From: San Jose | Registered: May 2008
| :
|
|
2T0NE
Go 49ers
Member # 4216
|
posted
thanks
-------------------- Originally posted by x Raelsmar x: Can't wait till the Giants lose tomorrow night so all you Giants fans are forced to shut the fuck up.
Posts: 14676 | From: 760 carlsbad | Registered: Mar 2004
| :
|
|
*BlownMach1*- TRMYN8R
¯
Member # 5400
|
posted
Don't do a 2.65 upper on ur car, do a lower setup instead, for one u will be OVERSPINING the shit outta the blower and 2 u will have belt slip issues! Even with a snub idler! Also u make more torque off a lower pulley then a upper! I say a 2.76 with a 4lb lower on a Ported eaton or a 2.93 with a 6lb lower! If the eaton is not ported then don't add more boost! U will overheat the blower and send the IAT2's thru the roof! I've already done all these combos on my car so I gave already lived and learned!!
-------------------- 88 notch- MM&FF June 2014 feature car 93 cobra #1879 90 hatch "Wifey's" 14 F150 89 mastercraft- wake tower with some sound
Team True Forged!!!
Posts: 3535 | From: sac town | Registered: Feb 2005
| :
|
|
SSSSIKH
¯
Member # 8397
|
posted
quote: Originally posted by *BlownMach1*- TRMYN8R: Don't do a 2.65 upper on ur car, do a lower setup instead, for one u will be OVERSPINING the shit outta the blower and 2 u will have belt slip issues! Even with a snub idler! Also u make more torque off a lower pulley then a upper! I say a 2.76 with a 4lb lower on a Ported eaton or a 2.93 with a 6lb lower! If the eaton is not ported then don't add more boost! U will overheat the blower and send the IAT2's thru the roof! I've already done all these combos on my car so I gave already lived and learned!!
LMAO!!!!......
-------------------- AED WWW.AEDHP.COM
Posts: 895 | From: San Jose | Registered: May 2008
| :
|
|
Greasy
¯
Member # 5258
|
posted
Don't mess with a pulley swap, go straight for a Whipple or Kenne Bell.
-------------------- '93 Cobra-Coyote Powered '03 DSG Cobra '13 Dodge Cummins '14 Rubicon X
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
SSSSIKH
¯
Member # 8397
|
posted
quote: Originally posted by Greasy: Don't mess with a pulley swap, go straight for a Whipple or Kenne Bell.
yeah because a pulley cost $150, and a whipple is only $3600...
-------------------- AED WWW.AEDHP.COM
Posts: 895 | From: San Jose | Registered: May 2008
| :
|
|
Greasy
¯
Member # 5258
|
posted
quote: Originally posted by SSSSIKH: quote: Originally posted by Greasy: Don't mess with a pulley swap, go straight for a Whipple or Kenne Bell.
yeah because a pulley cost $150, and a whipple is only $3600...
lol yeah you have to buy everything brand new You can pick up a used 2.3L for $2,600 or cheaper. Plus the smile it would put on your face over a pulley is priceless.
-------------------- '93 Cobra-Coyote Powered '03 DSG Cobra '13 Dodge Cummins '14 Rubicon X
Posts: 3272 | From: North Dallas | Registered: Jan 2005
| :
|
|
1RaW03SvT
¯
Member # 9151
|
posted
my blower is a stage 5 steggy ported blower with a 2.76 on it right now!! i was thinking of doing a 4 lbs lower but shits a lil expensive lol
-------------------- 2003 SoNiC BlUe CoBrA BUILT
Posts: 2159 | From: *SVTaDDicT* | Registered: May 2009
| :
|
|
Nitmare67
¯
Member # 9846
|
posted
My car is only a 2v but I run a KB 2.1 and LOVE IT... the instant torque and power is insane... it will make 10lbs of boost from 1800RPM up literally... I put down 411rwhp/470tq in 91 degree heat on a stock 160k long block lol. Nothing compares to it. Next up is changing the inlet to the cobra style (mammoth inlet and accufab single blade).. I picked up my entire KB kit with every bell and whistle, power pipe, kb, injectors, HE, an entire kit 2800 bucks with only 9k miles on it.... You should keep your eyes peeled u may get lucky! [ July 31, 2012, 10:20 PM: Message edited by: Nitmare67 ]
Posts: 77 | From: Modesto | Registered: Mar 2010
| :
|
|
Blue92
¯
Member # 8789
|
posted
quote: Originally posted by Nitmare67: My car is only a 2v but I run a KB 2.1 and LOVE IT... the instant torque and power is insane... it will make 10lbs of boost from 1800RPM up literally... I put down 411rwhp/470tq in 91 degree heat on a stock 160k long block lol. Nothing compares to it. Next up is changing the inlet to the cobra style (mammoth inlet and accufab single blade).. I picked up my entire KB kit with every bell and whistle, power pipe, kb, injectors, HE, an entire kit 2800 bucks with only 9k miles on it.... You should keep your eyes peeled u may get lucky!
Posts: 2906 | Registered: Dec 2008
| :
|
|