Author
|
Topic: Need help wiring radio
|
naked5.0notch
¯
Member # 14058
|
posted
Need some help installing a pioneer flip up deck. The stock harness is hacked up and not sure on wiring as far as they speakers and such. Located in Dublin if anybody can help
Posts: 1223 | Registered: May 2015
| :
|
|
Martinna
¯
Member # 12493
|
posted
Ford stereo wiring:
Right Front +: White-Light Green Right Front -: Dark Green-Orange Left Front +: Orange-Light Green Left Front -: Light Blue-White Right Rear +: Orange-Red Right Rear -: Brown-Pink Left Rear +: Grey-Light Blue Left Rear -: Tan-Yellow
For MACH 460/1000 system Amp Enable: Pink-Light Blue Pre-Out Right Rear +: Tan-Light Green Pre-Out Right Rear -: White-Pink Pre-Out Left Rear +: Tan-White Pre-Out Left Rear -: Dark Blue-Orange
Other circuits going to the radio: Back light: Light Blue-Pink Battery +: Light Green-Pink Ignition Run +: Brown-Pink Ground: Black-Light Green
Posts: 1093 | From: City | Registered: Oct 2012
| :
|
|
naked5.0notch
¯
Member # 14058
|
posted
Thanks that helped. What about for running a amp for the signal wire ?
Posts: 1223 | Registered: May 2015
| :
|
|
Martinna
¯
Member # 12493
|
posted
The signal wire that turns on the amp? I think it goes to an ignition wire that goes hot with the key in the on position. I think MACH 460/1000 systems were the first to introduce this wire in the radio connector. Older cars need to tap into a fusbox line. http://www.veryuseful.com/mustang/tech/engine/ has wiring diagrams and so do repair manuals from auto parts stores.
Posts: 1093 | From: City | Registered: Oct 2012
| :
|
|