|
Author
|
Topic: Setting TPS Voltage 91 5.0
|
fredfifty
Since
9/2010
Member # 10320
|
posted
 
 
I checked my TPS voltage and it is at .84 - .83 after adjusting as far as i could go...does anybody recommend making the holes where the screws go, any bigger? does it work? will i be able to get in range from where im at now? typical range .98 - .99?
first time doing it fyi...
--------------------
RIP EDSON VELORO
IM A NOOB, EXCUSE ME. THANKS.
92 LX Coupe 5.0 CARB'd BOLT-ONS SMOG LEGAL
62 Rag Impala
Posts: 4948 | Registered: Sep 2010
| :
|
|
Adam5.0
¯
Member # 6995
|
posted
There should be plenty of room to get in the right range. You might need a new sensor, sounds like your old one is bad.
--------------------
want something old and japanese
Posts: 1609 | From: Brentwood | Registered: Aug 2006
| :
|
|
fredfifty
Since
9/2010
Member # 10320
|
posted
how about if i do a base idle reset? will that help out adjusting the TPS into range?
--------------------
RIP EDSON VELORO
IM A NOOB, EXCUSE ME. THANKS.
92 LX Coupe 5.0 CARB'd BOLT-ONS SMOG LEGAL
62 Rag Impala
Posts: 4948 | Registered: Sep 2010
| :
|
|
LXjames
¯
Member # 10791
|
posted
Fred its perfectly ok to take a small drill bit and low powered driver and somewhat buzz the wholes to make it more adjustable per say. Only do it sliding wize because if you widen the holes all around the screws won't have nothing to hold on to
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
fredfifty
Since
9/2010
Member # 10320
|
posted
Thnx for the tips! Also would the range that my TPS is at now set off a check engine light?
--------------------
RIP EDSON VELORO
IM A NOOB, EXCUSE ME. THANKS.
92 LX Coupe 5.0 CARB'd BOLT-ONS SMOG LEGAL
62 Rag Impala
Posts: 4948 | Registered: Sep 2010
| :
|
|
LXjames
¯
Member # 10791
|
posted
Maybe a low tps voltage (or equivalent) code. Just don't set it any higher than .97??????????? I think
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
fredfifty
Since
9/2010
Member # 10320
|
posted
quote:
Originally posted by Adam5.0:
There should be plenty of room to get in the right range. You might need a new sensor, sounds like your old one is bad.
what causes the TPS to go bad? the contacts?
--------------------
RIP EDSON VELORO
IM A NOOB, EXCUSE ME. THANKS.
92 LX Coupe 5.0 CARB'd BOLT-ONS SMOG LEGAL
62 Rag Impala
Posts: 4948 | Registered: Sep 2010
| :
|
|
fredfifty
Since
9/2010
Member # 10320
|
posted
quote:
Originally posted by LXjames:
Maybe a low tps voltage (or equivalent) code. Just don't set it any higher than .97??????????? I think
my TPS is currently at .84 would that be considered low? low enough to set off the CEL?
--------------------
RIP EDSON VELORO
IM A NOOB, EXCUSE ME. THANKS.
92 LX Coupe 5.0 CARB'd BOLT-ONS SMOG LEGAL
62 Rag Impala
Posts: 4948 | Registered: Sep 2010
| :
|
|
|
|
Adam5.0
¯
Member # 6995
|
posted
quote:
Originally posted by fredfifty:
quote:
Originally posted by Adam5.0:
There should be plenty of room to get in the right range. You might need a new sensor, sounds like your old one is bad.
what causes the TPS to go bad? the contacts?
Yes the contacts basically get worn down, usually happens at less than half throttle because that's were the contacts spend most of their time. I have found that 5.0's seem to run the best at tps set at .99 volts
--------------------
want something old and japanese
Posts: 1609 | From: Brentwood | Registered: Aug 2006
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
