Author
|
Topic: Do I Need To Balance Skinnys On A Drag Car?
|
ItzStock
¯
Member # 9665
|
posted
Do I need to balance the skinnys on my drag only car? Or is it not needed? Car will see no street, Only low 10 high 9 sec passes. 15 x 3.5 Draglites With 26 x 4.5 x 15 Ds-2 Moroso's
How about balancing the slicks? 15 x 8 Draglites With 28 x 9 x 15 Et Drags [ September 28, 2011, 09:31 PM: Message edited by: ItzStock ]
Posts: 1394 | From: Vallejo, Ca | Registered: Dec 2009
| :
|
|
OneFastHatch.
¯
Member # 9537
|
posted
yes
-------------------- 1991 fobra (slow)
Posts: 2139 | From: bay area | Registered: Oct 2009
| :
|
|
ItzStock
¯
Member # 9665
|
posted
Does it matter how they get balanced (through the center bore or by the lug holes)? Weld said the Drag Lights are lug centric and I may get poor results if balanced through the bore like a standard wheel, is this true?
Posts: 1394 | From: Vallejo, Ca | Registered: Dec 2009
| :
|
|
Notch1320
Man Pedal
Member # 2647
|
posted
Take them to a reputable shop for balancing. Welds have a floating center and I have had a shop F-up a set smoking down the balancing cone and crushing the center of the wheel.
Posts: 2349 | From: Yuba City, CA | Registered: Mar 2003
| :
|
|
VendicatedSN95
¯
Member # 10671
|
posted
Call around, a lot of shops have lug centeric adapters for their balancers
Posts: 139 | From: The Bay | Registered: Feb 2011
| :
|
|