|
Author
|
Topic: help with code and cam shaft postion sensor
|
SlowStockFox
Stock Fox
Member # 1081
|
posted
 
 
i just recently bought a 96 ford taurus for a grand. it has code po340
how do i test it, do i just replace it or do i have to set it a certain way? the car runs great but i only got 12.5 mpg to this tank{my first tank with the car} so would this code/ sensor make for bad mpg? again like i said it runs great. also car has 175k. i did clear the code thinking maybe it just hadnt been reset but it came back on. the scanner i used says po340 cam postion sensor A circut{bank 1 or single sensor}
other problem is. guy put a pulley on the power steering puimp. steering is fine but at time it get hard to turn like it has no p/s what would cause that?
--------------------
i walk around....dont drink and drive
Posts: 2957 | From: cali | Registered: Mar 2002
| :
|
|
SlowStockFox
Stock Fox
Member # 1081
|
posted
ttt
--------------------
i walk around....dont drink and drive
Posts: 2957 | From: cali | Registered: Mar 2002
| :
|
|
lotathrottle.
¯
Member # 4826
|
posted
if it is not the sensor, then change the alternator. when the alt goes bad it sometimes messes with the cps.
--------------------
95 gt not sure yet
12.00 03 gt - traded in
11.51 04 mach - retired
11.82 02 GT - traded in
12.70 87 LX - parted
13.80 93 GT - sold
Posts: 1355 | From: sac | Registered: Sep 2004
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
