|
Author
|
Topic: blower power pipe
|
SIKSEVN
¯
Member # 3033
|
posted
 
 
I'm looking for a good power pipe I'm thinking about going with the anderson power pipe for my vortech s trim ...is there a better power pipe out there or is anderson the way to go...I want the best bang for my buck pretty much
--------------------
92COUPE/HCI302/ S-TRIM/TREMEC/ 410-GEARS/6-POINT CAGE
Posts: 786 | From: BAY AREA | Registered: Jul 2003
| :
|
|
92_5.0
¯
Member # 7624
|
posted
best bang for your buck would be the UPR power pipe, made of plastic so it doesnt heat soak. I have it on my car and also have an S-trim and picked up about 2 lbs of boost.
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
SIKSEVN
¯
Member # 3033
|
posted
ive been tryin to get on there web site and for some reason i think its down it is uprproducts.com
--------------------
92COUPE/HCI302/ S-TRIM/TREMEC/ 410-GEARS/6-POINT CAGE
Posts: 786 | From: BAY AREA | Registered: Jul 2003
| :
|
|
92_5.0
¯
Member # 7624
|
posted
yup, I'm having trouble too, must be on their end
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
SIKSEVN
¯
Member # 3033
|
posted
thanks for the help as soon as its up im going with that same power pipe ill let you know if i gain any psi
--------------------
92COUPE/HCI302/ S-TRIM/TREMEC/ 410-GEARS/6-POINT CAGE
Posts: 786 | From: BAY AREA | Registered: Jul 2003
| :
|
|
92_5.0
¯
Member # 7624
|
posted
![[patriot]](graemlins/patriot.gif) ![[burnout]](graemlins/burnout.gif)
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
01GT#1STUNA
¯
Member # 7620
|
posted
quote:
Originally posted by 92_5.0:
hey man quike question for u im useing a jLt cold air intake pipe made of pvc.i need to plum in my blow off valve.im trying to install it the same way i had it before the JLT pipe.i was going to use another PVC threaded on one side with a pipe on the other,so i can use a rubber hose an clamp to connect them together.how much heat will the PCV fitting take,under 15 to 19 pounds of boost.ill be useing cement pvc glue to connect the fitting.please help
    
--------------------
PROCHARGED 01 GT 465RWHP 475RWTQ 15.5 POUNDS OF BOOST.THIS MONSTER IS BUILT FROM THE FLOOR UP.BUILT NOT BOUGHT."TOTAL PACKAGE"
Posts: 359 | Registered: Apr 2007
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
