|
Author
|
Topic: Will 30# injectors work on a 2001 supercharged with bolt ons?
|
OUT4SPD 2010 GT
¯
Member # 7564
|
posted
 
 
I bought a used vortech v2 supercharger and was wondering if any one is running a similar set up with good results? Bolt ons are Borla cat back,acufab throttle body and upper intake, and I am changing the cams to comp 262ah before the supercharger is installed. I plan to run the stock 3.6in pulley on the supercharger. It also has the power pipe and a Pro-M meter calibrated for the 30# injectors. I know It will need to be tuned but I see vortech included 38lb injectors for 2001 in there kits. The 1999 kit came with 30# injectors. Does any one know if this setup will work? Will it lean out with my setup with this injector size?I dont want to pay for tunning and be told they cant get my air fuel right with these injectors. About 10 years ago I had a 1990 saleen that had a vortech pushing 12lbs of boost. I did have the fmu set at 75psi though just not to sure about this new stuff thanks.
Posts: 42 | From: Discovery Bay | Registered: Apr 2007
| :
|
|
nine
¯
Member # 6732
|
posted
Assuming 90% duty cycle, .55 BSFC, and 15% loss through the driveline, those 30#'ers are only good for ~330rwhp.
Posts: 40 | Registered: Apr 2006
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
