|
Author
|
Topic: speedo gear question...
|
JoHnNy SaVaGe
¯
Member # 6424
|
posted
 
 
How hard is it to swap the speedo gear for when you do a 3.73 swap? I got the new speedo gear and looked up some info on it and it doesn't seem that hard just wanted to check with your guys personal experience doing it.
--------------------
SCARED MEN DON'T WIN
Posts: 152 | From: 415 | Registered: Jan 2006
| :
|
|
JoHnNy SaVaGe
¯
Member # 6424
|
posted
any one? I'm sure some one has changed it before come on fellas help me out.
Posts: 152 | From: 415 | Registered: Jan 2006
| :
|
|
hockeyguy713
¯
Member # 5354
|
posted
Just follow the speedo cable to the transmission after you jack the car up a little bit. It connects on the drivers side of the transmission. Theres only 1 bolt (maybe 2), pull the assembly out, snap off the c clip put the new gear on and re-insert.
Done.
--------------------
91 GT
Posts: 489 | From: east bay | Registered: Feb 2005
| :
|
|
JoHnNy SaVaGe
¯
Member # 6424
|
posted
Cool thanks Hockey guy! should be a piece of cake then!
--------------------
SCARED MEN DON'T WIN
Posts: 152 | From: 415 | Registered: Jan 2006
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Look on the rear of the tailshaft, nearly directly to the left of the transmission mount. The cable/housing assembly is held in by a 11mm bolt. It pulls straight out. You will need a small flatblade screwdriver to remove the retaining clip. Gear comes straight off. Re-install in reverse order.
--------------------
1965 Shelby Cobra
1993 Cobra
2012 F150 Raptor
2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
