|
Author
|
Topic: I need A Rollcage/Bar Help?
|
Coyoteswapfox92
¯
Member # 4057
|
posted
 
 
Want to buy a RollCage for my 98 Cobra and need some help. It has to be NHRA Legal and a weld in. I would also like a 6 point. Anyone know of a good place to get one and how much it may cost installed? The closer to Sacramento the better. Oh and if you have a shop name and number that would be great. Thanks in advance.
--------------------
1992 Coyote project under construction.
Posts: 1051 | From: Yuba City, Ca | Registered: Jan 2004
| :
|
|
Rob [5LVENOM]
¯
Member # 2282
|
posted
Bought mine from Crhis Alstons chassis works in Sac.
To go faster then 11s it has to be an 8 pt I believe.
I know Motor Palace in Citrus Heights will install it, call Gordie, the owner.
Posts: 421 | Registered: Jan 2003
| :
|
|
Coyoteswapfox92
¯
Member # 4057
|
posted
quote:
Originally posted by 5LVENOM:
Bought mine from Crhis Alstons chassis works in Sac.
To go faster then 11s it has to be an 8 pt I believe.
I know Motor Palace in Citrus Heights will install it, call Gordie, the owner.
Oh Shit then Im gonna need a 8 point. Do you have a number for either place?
--------------------
1992 Coyote project under construction.
Posts: 1051 | From: Yuba City, Ca | Registered: Jan 2004
| :
|
|
|
|
forced331
¯
Member # 1270
|
posted
NHRA rules says 10.00 and slower on hard top car(non convertibles) you only need a 5point with the bar on the drivers side. So a 6 point will be fine. If the roll bar has 6 inch by 6 inch plates, you can bolt them on the the floor chasis, with 4 3/8 bolts on each plate. Maximum motorsports makes a good roll bar. Im installing one this month.
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
![[patriot]](graemlins/patriot.gif)
