|
Author
|
Topic: AFR Heads
|
graylx
¯
Member # 3919
|
posted
 
 
I may have found a source for AFR heads at a decent price. I am thinking of rebuilding my engine--boring it .030 over to make it a 306. I have heard that 165s are best for the 302 or 306 but I am tempted to get 185s because they are not that much more and I may want to upgrade later ![[Wink]](wink.gif) . (I realize that I will have to either have the pistons notched or buy notched pistons with the 185s). With the right cam and intake, will the 185s work as well (if not better than) the 165s? What cam and intake would work best with either if I wanted to remain smog legal? I was thinking either the Holley Systemax II intake or the Edelbrock Performer. Any opinions? Thanks ![[patriot]](graemlins/patriot.gif)
--------------------
2012 Mustang GT
1989 Mustang LX 5.0 Notch
1995 Impala SS
Posts: 891 | From: Fresno | Registered: Dec 2003
| :
|
|
94gt
¯
Member # 3060
|
posted
I wanna know the same things brotha!
--------------------
2020 Explorer ST
2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
graylx
¯
Member # 3919
|
posted
quote:
Originally posted by 94gt:
I wanna know the same things brotha!
![[Big Grin]](biggrin.gif) We both keep odd hours! ![[Whoo Whooooo!]](graemlins/woowoo.gif)
--------------------
2012 Mustang GT
1989 Mustang LX 5.0 Notch
1995 Impala SS
Posts: 891 | From: Fresno | Registered: Dec 2003
| :
|
|
94gt
¯
Member # 3060
|
posted
quote:
Originally posted by graylx:
quote:
Originally posted by 94gt:
I wanna know the same things brotha!
We both keep odd hours!
I'm usually up this late due to my work hours, and tonite it was due to some beers! ![[Smile]](smile.gif) ![[burnout]](graemlins/burnout.gif)
--------------------
2020 Explorer ST
2011 Silver Raptor 'Screw
Posts: 5777 | From: Beavercreek, OH | Registered: Jul 2003
| :
|
|
graylx
¯
Member # 3919
|
posted
TTT. Bueller? Bueller?
[ June 14, 2004, 06:40 AM: Message edited by: graylx ]
--------------------
2012 Mustang GT
1989 Mustang LX 5.0 Notch
1995 Impala SS
Posts: 891 | From: Fresno | Registered: Dec 2003
| :
|
|
forced331
¯
Member # 1270
|
posted
Those heads will work fine. Either intake will work, if you go Elelbrock get the RPM intake. The heads will work better if you at least go with 9.5:1 compression. Try the TFS stage 1 cam with 1.7 rockers.
--------------------
1992 Ford Mustang LX (Original Owner)"Titanium Frost" 331stroker S-Trim, 5spd
2014 Ford Mustang GT- daily driver
Posts: 1154 | From: Sonoma County | Registered: May 2002
| :
|
|
mtbaughs
Road Racer
Member # 4052
|
posted
The car will have less bottom end power with the 2.02 intake head. They should only be run with an aggressive camshaft on a 302, a motor built to rev or with a power adder. Otherwise I'd stick with a 1.90 intake head
--------------------
R.I.P. Charlie Bruno Dec 2001
Posts: 2019 | From: Boise, Idaho | Registered: Jan 2004
| :
|
|
chosen1
¯
Member # 1906
|
posted
quote:
Originally posted by mtbaughs:
The car will have less bottom end power with the 2.02 intake head. They should only be run with an aggressive camshaft on a 302, a motor built to rev or with a power adder. Otherwise I'd stick with a 1.90 intake head
--------------------
1967 Fastback. Should go 10's -but doesn't
1993 Cobra
2003 Suzuki SVS
1966 Coupe -For Sale
Posts: 2205 | Registered: Sep 2002
| :
|
|
graylx
¯
Member # 3919
|
posted
O.K...thanks for the responses guys.
--------------------
2012 Mustang GT
1989 Mustang LX 5.0 Notch
1995 Impala SS
Posts: 891 | From: Fresno | Registered: Dec 2003
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
Here's what I'd do:
AFR185
RPM intake
X303 for a smog motor. (no notching needed when you use aftermarket pistons with good sized valve reliefs)
XE274 or custom (read: LARGE & NASTY!) for more power.
You'll have PLENTY of low-midrange with the 185's. The cross-section is smaller then TW heads & how many of those do you see around making tons of midrange TQ? (Fasterdamnit even has hogged out TW's & has a VERY nice TQ curve)
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4265 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
biggmatt
¯
Member # 1124
|
posted
where was the place u can get decent prices ur were sayin?
Posts: 392 | From: pittsburg | Registered: Apr 2002
| :
|
|
166 Merlo
FELONY
MOTORSPORTS
Member # 1549
|
posted
some dude on raccoonracing is "hooking" it up
--------------------
'89 - Boss Coupe
'70 - Drop Cutthang
'68 - Cougnut
'87 - 0166, Its real
Posts: 3953 | From: Thebay | Registered: Jul 2002
| :
|
|
5PT SLOW
¯
Member # 638
|
posted
is any notching required with stock pistions with 185 afr heads with e or f cam?
Posts: 553 | From: Pittsburg, CA | Registered: Dec 2001
| :
|
|
graylx
¯
Member # 3919
|
posted
quote:
Originally posted by 93PONY:
Here's what I'd do:
AFR185
RPM intake
X303 for a smog motor. (no notching needed when you use aftermarket pistons with good sized valve reliefs)
XE274 or custom (read: LARGE & NASTY!) for more power.
You'll have PLENTY of low-midrange with the 185's. The cross-section is smaller then TW heads & how many of those do you see around making tons of midrange TQ? (Fasterdamnit even has hogged out TW's & has a VERY nice TQ curve)
--------------------
2012 Mustang GT
1989 Mustang LX 5.0 Notch
1995 Impala SS
Posts: 891 | From: Fresno | Registered: Dec 2003
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
quote:
Originally posted by WestCOCOBenchRacing:
is any notching required with stock pistions with 185 afr heads with e or f cam?
F for sure, E yeah....
[ June 15, 2004, 10:50 PM: Message edited by: Black94 5.0 ]
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
