|
Author
|
Topic: need help asap w/ cam install !
|
SydeWaySix
CAFords OG
Member # 3596
|
posted
 
 
hey guys
i've got the crane 2031 slipped into my 95gt, but the dowel pin on the cam seems way too short. i've got hte frpp timing set that comes with a new pin, can i replace it? also, the timing set seems really really tight when i put it together, is this normal? thanks alot in advance,
phil
--------------------
2013 Boss 302 #356. Performance White. Stock.
1965 Fastback GT Restored to stock spec.
Posts: 9882 | From: Bay Area | Registered: Dec 2002
| :
|
|
jmcclesk
Moderator
Member # 1355
|
posted
a new timing set will be tight,
--------------------
Ford trained ASE master tech.
Posts: 4024 | From: marrysville | Registered: May 2002
| :
|
|
66 AC COBRA
Nitrous King
Member # 904
|
posted
quote:
Originally posted by jmcclesk:
a new timing set will be tight,
havent seen you in a while, does the white notch run, thinking of maybe going to the track to get your record back from jim
--------------------
FFR AC Cobra
72 Vega - WCHRA Extreme 10.5
Posts: 6280 | From: Winters | Registered: Feb 2002
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
Quote by mtbaughs:
Go ahead and change the locating dowel with the one of proper length. When you install the timing chain with the upper and lower sprocket/gear it goes on tight. Position both sprockets so they are both engaged equal amounts both on the cam and on the crank. In doing this you should be able to push the assembly on with your hands. If the assembly isn't installed equally front to bottom the assembly will bind and this is likely the reason you are having trouble. Some cases require a gentle tap with a rubber mallet to be installed as this is normal
--------------------
Former Charlies Mustang's & Apex Motorsports Mechanic
I do side work PM for info
1990 302 coupe, full griggs, custom road race cage
--------------------------------------------------------------------------------
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
SydeWaySix
CAFords OG
Member # 3596
|
posted
thanks for all of the help guys, finally got it installed, but now it won't start, which is why i posted another cry for help tonight. hahaha, yea but the timing set is fine and tucked away, thanks again,
phil
Posts: 9882 | From: Bay Area | Registered: Dec 2002
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
