|
Author
|
Topic: Got my car back, have some questions
|
Jerm95gt
Diapers
Member # 1239
|
posted
 
 
My car won't really idle.......sometimes it sorta does but it will die sometimes when just pushing the clutch in......
Also there is a check engine light on....but everything seems to be ok...as far as i can tell....
I got crane2031, and edelbrock heads put in.
--------------------
I miss you StoplightWarrior :(
Posts: 627 | From: Martinez | Registered: May 2002
| :
|
|
93PONY
Mr. Valve Events
Member # 60
|
posted
What RPM does the car idlea at?
I just put that cam in Paul's Cobra & it idles steady at 650.
Pull codes & see what's in there. If the check engine light came on, it should have a stored code. To pull codes all you need is a piece of wire, a piece of paper, & a pencil.
--------------------
www.advancedenginedevelopment.com
SCT dealer
Dynotuning
(916)715-7569
Posts: 4265 | From: Fair Oaks, CA | Registered: Nov 2000
| :
|
|
Lightning Larry
¯
Member # 2737
|
posted
quote:
Originally posted by Jerm95gt:
My car won't really idle.......sometimes it sorta does but it will die sometimes when just pushing the clutch in......
Also there is a check engine light on....but everything seems to be ok...as far as i can tell....
I got crane2031, and edelbrock heads put in.
Take it back!!! Seriously.
--------------------
04 Black Lightning
Admin. at www.SVTperformance.com
Posts: 541 | From: Redwood City Ca. | Registered: Apr 2003
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
Check for vacuum leaks first....Then I would suggest checking the TPS voltage too..(.998 at idle)...
If your getting a check engine light then yep, you probably got a code in there somewhere....I wouldnt try guessing, I would go straight to the code scanner...
Good luck....
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
Stimson
_
Member # 51
|
posted
There is no need to adust the TPS setting on 94/95 (possible '94+, I forget) cars. Every 5(if I remember right) engine starts, the EEC automatically "zeros" the TPS setting. Just make sure its under a volt and you'll be fine.
I agree with the pulling codes gig.
Posts: 2373 | Registered: Jun 2000
| :
|
|
Jerm95gt
Diapers
Member # 1239
|
posted
thanks........the jacket on the spark plug wire is cracked on like #7 cylinder or some shit.....might be a bad plug too.....im going to check the codes.
--------------------
I miss you StoplightWarrior :(
Posts: 627 | From: Martinez | Registered: May 2002
| :
|
|
BlackNGold
CaliforniaFords.com
Moderator
Member # 655
|
posted
quote:
Originally posted by st5150:
There is no need to adust the TPS setting on 94/95 (possible '94+, I forget) cars. Every 5(if I remember right) engine starts, the EEC automatically "zeros" the TPS setting. Just make sure its under a volt and you'll be fine.
I agree with the pulling codes gig.
~I must have checked and adjusted my TPS voltage after every 4th engine start then..... ![[Razz]](tongue.gif)
--------------------
-SLOWER TRAFFIC KEEP RIGHT-
Posts: 5132 | From: Bay Area, CA | Registered: Dec 2001
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
