Nitmare67
¯
Member # 9846
|
posted
 
 
This is a 4.6 block bored .020 over. Never ran. I assembled the motor, it sat on the stand for 1 year then I changed directions with my build and this motor would have been way to high of compression. I ended up just buying an MMR1000 short block due to time and sold the rotating assembly out of this one.
So with that the following are the facts of the block.
Already bored and honed to .020". Pick your pistons of choice and build it. I built the motor for Mahle pistons which fit tighter than Manley or Diamond so a stock piston would work great and a 2618 piston would work as you could still hone to get perfect skirt clearance or just build as is. Brass freeze plugs already installed. Cylinder head deck resurfaced (will seal VERY nicely. Has ARP side bolts already installed.
I also have new melling oil pump I will throw in for an extra 50 bucks.
I'm interested in trades for a 351w block in equal condition or trade with some cash.
Let me know what you have THAT MUST BE 4.6 99-04 MUSTANG RELATED. No 5.0 stuff, no garbage.
250 or B/O for block
300 for block with brand new oil pump.
Thanks
[ 2013-10-07, 09:43 PM: Message edited by: Nitmare67 ]
Posts: 77 | From: Modesto | Registered: Mar 2010
| :
|
Email this post to someone!
Printer friendly view of this Ford topic
