|
Author
|
Topic: 91 5.0 Mustang Project: rolling chassis, engine, new interior & parts, 5 Lug conv.
|
BlacksheepMod50
¯
Member # 2378
|
posted
 
 
I have a 91 Ford Mustang that I took on as a project car and have just simply got to a point where I have no more time on my hands. I've bought so many new parts for this car and invested time into stripping it down to rebuild it, but I admitted to myself after a year that there just isn't enough time to take it on right now.
PRICE: Make an offer! I have about $4,000 invested in parts and chassis cost not including my time on all the body work I've done.
*IDEALLY I'd like to sell the whole thing together as a package versus parting it out*
WHAT I HAVE:
-91 Mustang Chassis (Salvaged title, but only because of the low cost of vehicle at the point when it was involved in the accident). Engine is removed as it was going to be rebuilt (it runs perfectly fine as is) - Perfect opportunity to paint the engine compartment and make it look brand new. The door handles on the vehicle have been shaved. Door poppers have been installed and are controlled by remote which is all hooked up and function properly.
- Freshly rebuilt T5 transmission out of a '95 mustang. The transmission has about 50 miles on it and has had no issues. Transmission also has new $150 3rd gear which are the most prone to breaking.
- New battery that has been put on the trickle charger
- 5.0 Engine with newish power steering pump. (Smog pump lines have been removed). Heads have been milled. Various components have been painted.
- All interior has been removed
- 4 to 5 Lug conversion has already been completed on this vehicle.
- All new interior set has been purchased (All black) includes: New headliner, new interior door panels, new carpet, new covering for all seats (all have already been recovered by me with the exception of 1 seat. I have new foam to add to uncovered seat as necessary. New arm rest pads. New switch plates for windows.
- Audiobahn 6X9 Flame Series door speakers
- New front bumper clip
- Used rear bumper clip (but new to this vehicle)
- All cosmetic plastic has been removed, thoroughly cleaned and lightly scuffed to be primmered and painted to match new black interior with interior paint.
----------------------------------------------
A list of (MOST) of the new parts purchased can be found below
1x KYB-235009B-K 87-93 STRUT & SHOCK KIT, 5.0L
2x KYB-235009 87-93 FRONT STRUT, 5.0L
2x KYB-KG5551 79-93 REAR SHOCK, ALL
1x LRS-06024N-K 87-93 ARM REST PAD KIT, BLACK
1x LRS-13530 87-93 CONSOLE TRIM PANEL
1x LRS-13530HDW 87-93 CONSOLE TRIM PANEL SCREW
1x LRS-06024N 87-93 ARM REST PAD, BLACK
1x LRS-14527E-K 87-93 COVER KIT, WINDOW SWITCH
1x LRS-14527E 87-93 COVER, WINDOW SWITCH, LH
1x LRS-14528E 87-93 COVER, WINDOW SWITCH, RH
2x LRS-14529A 87-93 SWITCH, POWER WINDOW
1x LRS-20934-K 87-93 MOLDING AND SEAL KIT, DO
1x LRS-20934PR 87-93 DOOR BELT MOLDING, OUTSI
1x LRS-21452PR 87-93 WEATHERSTRIP, DOOR BELT,
1x LRS-24141A-K 87-93 ARMREST PAD KIT, BLACK,
1x LRS-24141A 87-93 PAD ARMREST, LH, BLACK,
1x LRS-24140A 87-93 PAD, ARMREST, RH, BLACK,
8x LAW-90143 1-1/8" SCREW
1x LRS-388664K 79-93 FRONT BUMPER COVER RIVET
21x LRS-388664S100 79-93 RIVET, FRONT BUMPER COVE
1x LRS-51726-K 87-93 ROOFRAIL MOLDING KIT, C
1x LRS-51726AP 87-93 ROOFRAIL MOLDING, RH
1x LRS-51727AP 87-93 ROOFRAIL MOLDING, LH
1x LRS-8190D 87-93 BUMPER COVER, FRONT, GT
1x LRS-8600F 86-93 FAN BLADE, OE FORD
1x LRS-N802900-KIT 79-93 KIT, REMOVAL/INSTALLATIO
1x LRS-6010001 TOOL, REMOVAL, DOOR PANEL
2x LRS-N802900S 79-93 CLIPS, DOOR PANEL, 12PC
1x PE-1073 85-93 NUTS, FENDER & QUARTER P
Items worth noting that still need work:
- The cosmetics of the vehicle are probably the biggest item remaining, but all the pieces are there ready to be put together short of a few items listed below. Entire vehicle needs paint and associated body work needs to be completed. Most major bodywork has already been completed.
- Has moon roof, but is missing minor hardware component.
- I have a front right fender, but needs body work, or a new/used fender needs to be purchased
- Side moldings/ground effects need to be cleaned up and have body work done to them.
- Engine obviously needs to either be put back in the vehicle or upgraded with whatever new components you'd like to put into it.
- It is missing one rear quarter panel window that I broke while trying to remove, the other window is intact, just removed from the vehicle right now.
We have a trailer and can bring the vehicle to you if you are in the Sacramento area and the price is right.
Call Ryan - 916-223-6934
[ October 11, 2008, 05:41 PM: Message edited by: BlacksheepMod50 ]
--------------------
98 4.6, stroked to 5.0, all forged, 11:1 comp, cams, LTs, Tubular K-member & A-Arms, Coilovers, Saleen rims, 99+ mani., ported F150 heads. And more..
Posts: 288 | From: Fair Oaks (Sacramento) | Registered: Jan 2003
| :
|
|
Drift-GT
¯
Member # 762
|
posted
If your interested in parting out the drivetran components shoot me a PM and we can talk about how much your looking to get.
Thanks,
- Dana
--------------------
- 1965 GT “K” code Mustang, RIP
- 2002 Silver GT 5 speed
- 2004 Kawasaki ZX-10R
Posts: 552 | From: Freakmont, CA U.S. of A | Registered: Jan 2002
| :
|
|
91LxStang
¯
Member # 8378
|
posted
if you part it i will take the suspension along with the 5 lug setup
Posts: 282 | From: fremont | Registered: May 2008
| :
|
|
06Xrunner
¯
Member # 6992
|
posted
I'm interested in the wheels if you part it...
--------------------
01 Black GT 526WHP sold
2012 5.0 GT 625WHP sold
1984 Buick G/N Built and boosting...
Posts: 2124 | From: Chico, Ca | Registered: Aug 2006
| :
|
|
BlacksheepMod50
¯
Member # 2378
|
posted
Sorry guys - not trying to part it. The most that I'd part it out to is:
- Drive train
- Interior peices
- Roller with all other parts
Thanks for the interest!
[ October 18, 2008, 01:42 PM: Message edited by: BlacksheepMod50 ]
Posts: 288 | From: Fair Oaks (Sacramento) | Registered: Jan 2003
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
