|
Author
|
Topic: 5.0 PERFORMANCE PARTS: Motor, Rearend, Suspension, 5lug
|
66 InjectedCobra
¯
Member # 819
|
posted
 
 
Feel free to PM me or call my cell with any questions (510) 760-5254...Mike
All parts located in the East Bay (San Leandro)
MOTOR:
-GT40 Heads: $375 removed from a 89k mile 94 cobra and I had them freshened up at a local machine shop where they received a valve job and were pressure tested. Heads and pushrods NO ROCKERS
-B303 cam in very nice shape $75
-GT40 lower intake: $140
-Explorer Upper intake $180 (same as cobra/GT40)
-Venom performance program module bought from summit racing $100
REAREND:
- 8.8 fitted with 3:73 gears and freshly built posi/bearings. No brakes or axles just add your own and go. $250
5LUG:
-5 lug ranger drums cleaned and painted $50 pr
-partial rear SN95 brake setup missing only the caliper brackets. Comes with calipers loaded with good used pads, hoses, rotors, hardware. $150
-SN front brakes including spindles, hubs, rotors, calipers, lines, hardware, etc.... $300 for all
Lincoln front rotors cross drilled & 5lug, direct swap for stock fox rotors $125
Some trades are welcome and things I'm in need of are aftermarket H or X pipe for 87-93, good headers, 94-95 mustang motor or longblock.
Lemme know whats out there
(510) 760-5254....Mike ![[patriot]](graemlins/patriot.gif)
--------------------
Just An Old Slow Ford!
http://profile.myspace.com/index.cfm?fuseaction=user.viewprofile&friendid=6389544
Posts: 2857 | From: bay area | Registered: Jan 2002
| :
|
|
Drift-GT
¯
Member # 762
|
posted
Mike why you never call me back did I piss you off? ![[Wink]](wink.gif)
Are the SN spindles 94-95 or are they 96 and up? I want to get that stuff ![[Smile]](smile.gif)
- Dana
--------------------
- 1965 GT “K” code Mustang, RIP
- 2002 Silver GT 5 speed
- 2004 Kawasaki ZX-10R
Posts: 552 | From: Freakmont, CA U.S. of A | Registered: Jan 2002
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
