|
Author
|
Topic: Need a stock 90 5.0 for reference
|
naked5.0notch
¯
Member # 14058
|
posted
 
 
Hey guys,
I have my first mustang project car which is 1990 lx 5.0 notchback. Formally was an auto 5.0 and I have done the 5 speed swap before dropping in the engine and trans this past sunday. I need a stock 5.0 for reference to see where grounds,vacuum lines, and harness wires get routed. Mustangs are new to me and this is my first v8 rwd car so getting it running soon is a big deal to me. Thanks for any help and I'm located in dublin
matt
Posts: 1223 | Registered: May 2015
| :
|
|
92_5.0
¯
Member # 7624
|
posted
You can also google diagrams and photos ![[patriot]](graemlins/patriot.gif)
--------------------
Infineon/Sears point? same difference!
11.8 @ 115 mph @ Sac Raceway
411 rwhp 402 trq (old set up)
540 rwhp 517 rwtrq (new set up)
ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
Marks93
¯
Member # 11130
|
posted
Two good sites are fiveohinfo.com and veryuseful.com.
Wish I lived closer to Dublin. I'll be in San Ramon tomorrow and can probably swing by around lunchtime if there is something specific you need to look at. PM me.
Posts: 824 | From: Earth | Registered: Jul 2011
| :
|
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
