|
Author
|
Topic: 18x10 wheels with Irs
|
macthizzle
¯
Member # 3492
|
posted
 
 
How much would the wheels stick out?
--------------------
"FUCK U PAY ME"
Posts: 992 | From: REDWOOD CITY | Registered: Oct 2003
| :
|
|
|
|
macthizzle
¯
Member # 3492
|
posted
1986 coupe.
--------------------
"FUCK U PAY ME"
Posts: 992 | From: REDWOOD CITY | Registered: Oct 2003
| :
|
|
foxbody
¯
Member # 582
|
posted
depends on the wheel and offset
have 9" on my 93 cobra and its about as big as u can go
Posts: 15754 | From: san jose | Registered: Nov 2001
| :
|
|
Blow_U_In_Reverse
¯
Member # 12298
|
posted
I had 18x10 on my 82 notch with IRS.. with the 94-04 offset it would stick out too much.. the 18x10 +42mm was basically flush with the fenders.. text me if u want some pics 6502485682
--------------------
"Real Men Get BLOWN"
-1993 Cobra "COBRUUH"
-1984 T-Top Notchback
#KurganTuned
Posts: 2688 | From: FiJi-925-650 | Registered: Aug 2012
| :
|
|
Blow_U_In_Reverse
¯
Member # 12298
|
posted
quote:
Originally posted by foxbody:
depends on the wheel and offset
have 9" on my 93 cobra and its about as big as u can go
Yeah 9" is basically as wide as u can go without mods.. u can fit 10" by rolling the fenders, hammering the inner wheel housing, and gettin low profile bolts.. but the offset has to be between +42mm to +44mm.. anything smaller will stick out too much and anything bigger will rub on the inside..
[ 2015-05-28, 08:58 PM: Message edited by: Blow_U_In_Reverse ]
--------------------
"Real Men Get BLOWN"
-1993 Cobra "COBRUUH"
-1984 T-Top Notchback
#KurganTuned
Posts: 2688 | From: FiJi-925-650 | Registered: Aug 2012
| :
|
|
a302juGRnot
¯
Member # 10163
|
posted
10" inch wide will fit depending on the offset. get the 05+ offsets if the irs is on your 82. id say get +40 offset or higher on a 10" wheel. oh and rolled fenders is a must.
[ 2015-05-28, 11:21 PM: Message edited by: a302juGRnot ]
Posts: 1646 | From: sacramento | Registered: Jul 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
