|
Author
|
Topic: Bad Fender Rolling Experience in Sac
|
4 CAM FOX
¯
Member # 11891
|
posted
 
 
I brought my Girlfriends car (2009 Mazda 3) to this guy to ROLL the rear fender lips due to the rubbing from a new set of wheels. I have rolled fenders before and have done so very successfully without damage to the vehicle, So it would be safe to assume I know the process. This guy adjusted the tool and tried to flatten the fender lip in one pass and chipped the paint all along the edge of the fender. After that he test fitted the wheel and told me to drive it and see if it still rubbed. The tire still scraped, so he resorted to cranking down on the tool even more and pulling the fender out and "flaring" it. All he ended up doing was cracking the paint severely and bending the fender lip so that it looked VERY un-professional. He told me it was not his problem and that he would not compensate me. After 20 minutes of going back and forth, I decided to leave and pay to fix it on my own. Stay away from this guy.
CL ad;
http://sacramento.craigslist.org/pts/3753745695.html
I did not catch his name, but his number is (916) 743-0159 and his address is 7674 Darla Way. Sacramento CA 95828
![[BS flag]](graemlins/bs_flag.gif)
[ 2013-05-17, 10:21 PM: Message edited by: 925_GT ]
--------------------
"The clutch is on the left. Gas on the right."
"What's this one in the middle?"
"It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
Robb
¯
Member # 9444
|
posted
Who?
Posts: 2467 | From: Sacramento,CA | Registered: Sep 2009
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
quote:
Originally posted by Robb:
Who?
Original post updated.
--------------------
"The clutch is on the left. Gas on the right."
"What's this one in the middle?"
"It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
0089GT
FREE
PALESTINE
Member # 9996
|
posted
Pussy fuck that he should fix it. Go after him man
--------------------
FREE PALESTINE
Posts: 1151 | From: ssf | Registered: May 2010
| :
|
|
0089GT
FREE
PALESTINE
Member # 9996
|
posted
How is it not his fault? Wtf bro I woulda put knocked his teeth out and said whoops not my fault
--------------------
FREE PALESTINE
Posts: 1151 | From: ssf | Registered: May 2010
| :
|
|
Don57
¯
Member # 8518
|
posted
I have been looking around to get the fenders rolled on my 03. I have seen that post on Craigslist, was gonna contact him. But after seeing that result i will stay far away from him.
Thank for the heads up
Make a ad on Craigslist using his Title and Post then attach your pics.
--------------------
2003 Silver Cobra Vert
1994 Integra Turbo
HONDA MASTER TECH
Posts: 57 | From: Sacramento | Registered: Jul 2008
| :
|
|
Saleen 00-768
¯
Member # 9379
|
posted
Damn that Craigslist "guy" fucked ur shit off! as soon as I didn't like the way he was "cranking down" on the shit Ida been like whoa buddy u know what the fuck ur doing???
--------------------
'00 Saleen SC #768
'90 GT
'90 California Edition (sold)
'87 Saleen #264 (sold)
Posts: 1664 | From: NOR✯CAL | Registered: Aug 2009
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
I guess you couldn't wait until tomorrow for me to do it
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
sic70stang
CAFords OG
Member # 4347
|
posted
Exactly what I would expect from Craigslist.
--------------------
The anti-crew
1987 rolling safety violation.
Posts: 6940 | From: California | Registered: Jul 2005
| :
|
|
moeofit32
¯
Member # 10393
|
posted
quote:
Originally posted by racsirx:
I guess you couldn't wait until tomorrow for me to do it
my shit legit thanks to lee....sux he fucked u
--------------------
95 stroked and blown cobra
Posts: 2387 | From: antioch ca | Registered: Oct 2010
| :
|
|
Broke4.6
¯
Member # 9085
|
posted
wasnt a white kid in a drilled ass miata named Ivan was it??
--------------------
01 GT -lazer red- 32v swap
Posts: 1020 | From: Lodi, Ca | Registered: Apr 2009
| :
|
|
LETHL 03
¯
Member # 5401
|
posted
I bought an eastwood tool and heat gun and rolled my own fenders and its not hard. You should go after him
--------------------
RIP Willie Guzman LQ9SN95
Hard Head Muscle
#HHM #babydickcobra #lethl03
Posts: 4128 | From: 702 HHM | Registered: Feb 2005
| :
|
|
a302juGRnot
¯
Member # 10163
|
posted
quote:
Originally posted by Broke4.6:
wasnt a white kid in a drilled ass miata named Ivan was it??
Lol that's the same kid who did mine...did a decent job but he was deff not professional.
--------------------
H/C/I slammed and flushed NOTCHback
H/C/I 1995 mustang gt sold
Posts: 1646 | From: sacramento | Registered: Jul 2010
| :
|
|
MaK_1967v8
¯
Member # 12187
|
posted
haha wow. i would've whooped some ass.
--------------------
1967 C Code Coupe
2004 Roush Stage 2
Posts: 620 | From: Sacramento, CA | Registered: Jul 2012
| :
|
|
Wht86drop
¯
Member # 12104
|
posted
Get your money back one way or the other.
--------------------
Jalapeña Red 86 GT Vert
Yellow 72 Chevelle
Rio Red 97 Cobra
High-Output Generations CC
Posts: 1669 | From: East Palo Alto, Fiji Islands | Registered: Jun 2012
| :
|
|
mikeP
¯
Member # 4489
|
posted
please put him on blast on craigslist so the next honest person doesnt get jacked....too many assholes now adays that rip off honest people..
--------------------
91 vert lx 5.0, 68 CS, 69 BB nova
Posts: 975 | Registered: May 2004
| :
|
|
racsirx
CAFords OG
Member # 1710
|
posted
Mustangs are a lot easier to do for me since I started rolling fenders on them back in 1989, they are a lot thicker metal than an import and they are really hard to fuck up. 925 GT contacted me a few times but I was very busy doing something else, but I wanted to do them today for him since I didn't have much going on today and wanted to make sure to have a clear head and take my time since that Mazda has very thin metal and I didn't want to do what that guy did, I am very sorry I couldn't have done them for him.
--------------------
88 Saleen #564
88 GT 331 NOVI2000
88 Coupe TURBO 9.75@142
95 Cobra R #75-SOLD
06 F250
13 BMW AH3
17 GT350 #5556
GOD'S NOT DEAD
Posts: 20750 | From: Concord & Pittsburg, CA | Registered: Aug 2002
| :
|
|
LSFairmont
¯
Member # 6001
|
posted
Blame Lee! Lol... Sucks though
Posts: 3652 | From: the land of the lost | Registered: Sep 2005
| :
|
|
351w
¯
Member # 11875
|
posted
I think I saw that same guys number selling $150 iPads on Craigslist.
Posts: 1018 | From: 510 | Registered: Apr 2012
| :
|
|
4 CAM FOX
¯
Member # 11891
|
posted
I wanted Lee to do them, but time was an issue. Lesson learned.
I didn't pay the guy shit. He owes me money as far as I'm concerned.
--------------------
"The clutch is on the left. Gas on the right."
"What's this one in the middle?"
"It's for pussies."
Posts: 1798 | From: NOR*CAL | Registered: Apr 2012
| :
|
|
S550_Andres
¯
Member # 11083
|
posted
I rolled my with a rubber mallet worked good for me not I don't rub
--------------------
86 notch coyote swapped
89 convertible 302 hci
85 notch 347 hci
Posts: 2747 | From: 650-408 | Registered: Jul 2011
| :
|
|
Wildfire532FB
CAFords OG
Member # 1482
|
posted
i need to roll my fenders but i am afraid of doing the same thing to my paint.
--------------------
./_ _ _ ___ __\
(]]]_ _ o _ _[[[)
|\_o_ __ __o_/|
|__|..........|__|
68 Fastback
84 CJ7
94 HMMWV
95 GT
03 F350
17 Fusion Hybrid
Posts: 17578 | From: 530 | Registered: Jun 2002
| :
|
|
Fostang
¯
Member # 3752
|
posted
Razor blade and heat gun.
--------------------
67' Fastback TT 408
67' Camaro Lsx
64' Corvette Fuelie
57' Chevy Bel Air Lsx
68’ Pony Convertible
66’ Pony Coupe
Posts: 3011 | From: Stockton/Danville | Registered: Nov 2003
| :
|
|
166 Merlo
FELONY
MOTORSPORTS
Member # 1549
|
posted
Bro its craiglist, is he gonna reimburse u for $25, or did u let him fuck up all four fenders?
--------------------
'89 - Boss Coupe
'70 - Drop Cutthang
'68 - Cougnut
'87 - 0166, Its real
Posts: 3953 | From: Thebay | Registered: Jul 2002
| :
|
|
MauriSSio
¯
Member # 9943
|
posted
I just used a cutting wheel on mine. Easy.
Posts: 503 | Registered: Apr 2010
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
