|
Author
|
Topic: Anyone specialize in Chevy Colorado's?
|
BaLleRz68
¯
Member # 2299
|
posted
 
 
My dad has an 05 Chevy Colorado with a bad #1 cylinder and the whole head needs to be replaced. This is a common problem with this generation Colorado. Anyone know anybody who has a lot of experience with Chevy Colorados? Thanks.
Posts: 114 | From: Bay Area, CA | Registered: Jan 2003
| :
|
|
LXjames
¯
Member # 10791
|
posted
Are you looking for someone to do it?? If so contact me at 925-285-3708
I work for ryland racing in Brentwood. We're closed Monday for the holiday but contact me anytime before then and I can give you an estimate and get you into the shop
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
The Wolf
New Member
Member # 12024
|
posted
the head is a known issue. if you have less then 100,000 miles, its still under warranty.
you can check out coloradofans.com or 355nation.net for your colorado needs.
half way thru 06 they changed the head, and went to a 3.7 ltr instead of 3.5
hope this helps
--------------------
The Wolf
Posts: 2 | From: SinCal | Registered: May 2012
| :
|
|
BIGBALLFACTOR
¯
Member # 7277
|
posted
# 07123A: Special Coverage Adjustment - Engine Intake Valve Seat
(Nov 13, 2008)
Subject:
07123A -- Special Coverage adjustment -- Engine Intake Valve Seat
Models:
2004-06 Chevrolet Colorado
2004-06 GMC Canyon
THIS BULLETIN IS BEING REVISED TO ADD 2006 MODEL YEAR VEHICLES. PLEASE DISCARD SPECIAL COVERAGE BULLETIN NUMBER 07123, DATED AUGUST 2007.
Condition
Some customers of 2004-06 Chevrolet Colorado and GMC Canyon midsize pick-up trucks, equipped with either a 2.8L (RPO LK5) 4 cylinder or 3.5L (RPO L52) 5 cylinder engine, may experience a condition where the engine intake valve seats may wear, such that combustion leakage occurs. This will cause partial misfire and illumination of the Service Engine Soon (SES) light. Continued operation and resulting additional wear may eventually lead to engine idle roughness.
Special Coverage Adjustment
This special coverage covers the condition described above for a period of 7 years or 100,000 miles (160,000 km), whichever occurs first, from the date the vehicle was originally placed in service, regardless of
ownership. The repairs will be made at no charge to the customer.
For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after August 8, 2007 (2004-05 model year); November 13, 2008 (2006 model year) are covered by this special coverage and must be submitted using the labor operation codes provided with this bulletin. Claims with repair orders prior to August 8, 2007 (2004-05 model year); November 13, 2008 (2006 model year) must be submitted to the Service Contract provider.
Vehicles Involved
Parts Information
Parts required to complete this special coverage are to be obtained from General Motors Service and Parts Operations (GMSPO). Refer to the latest version of Technical Service Bulletin 06-06-01-017 to obtain the correct part numbers.
Customer Notification
General Motors will notify customers of this special coverage on their vehicles (see copy of typical customer letter shown in this bulletin - actual divisional letter may vary slightly).
Service Procedure
Refer to the latest version of Technical Service Bulletin 07-06-01-011 for Diagnostic Procedures to identify leaking valves, which must be confirmed by a cylinder leakage test for this special coverage to apply.
Refer to the latest version of Technical Service Bulletin 06-06-01-017 for Cylinder Head Removal/Installation Procedures.
Claim Information
For vehicles repaired under the terms of this special coverage, submit a claim with the information shown above.
Customer Reimbursement - For U.S.
All customer requests for reimbursement for previous repairs for the special coverage condition will be handled by the Customer Assistance Center, not by dealers.
Customer requests for reimbursement of previously paid repairs to correct the intake valve seat wear condition are to be submitted prior to or by August 31, 2008 (2004-05 model year); November 30, 2009 (2006 model year).
Important: Refer to the GM Service Policies and Procedures Manual, section 6.1.12, for specific procedures regarding customer reimbursement and the form.
Customer Reimbursement - For Canada and Export
Customer requests for reimbursement of previously paid repairs to correct the intake valve seat wear condition are to be submitted to the dealer prior to or by August 31, 2008 (2004-05 model year); November 30, 2009 (2006 model year). Repairs must have occurred within the 7 years of the date the vehicle was originally placed in service, or 160,000 km (100,000 miles), whichever occurs first.
When a customer requests reimbursement, they must provide the following:
^ Proof of ownership at time of repair.
^ Original paid receipt confirming the amount of unreimbursed repair expense(s) (including Service Contract deductibles), a description of the repair, and the person or entity performing the repair.
If the work was done by someone other than a GM dealership, the amount of reimbursement will be limited to the amount that the repair would have cost GM to have it completed by a GM dealership.
Disclaimer
© 2012 ALLDATA LLC. All rights reserved.
Terms of Use
Posts: 6908 | From: okc | Registered: Dec 2006
| :
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
