This is topic Free Dyno offer at Alteredspeed! in forum Vendor's FOR SALE Section at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=9;t=000064

---

Posted by jcm3man (Member # 3834) on :
 
Want to get those horsepower numbers on paper?

Here's a couple of ways you can do it and be able to back up the bench racing!

- "Bring a friend" 2 for 1 - Full (3 baseline dyno runs per person) for two people for $75.00.

- Free Dyno Run with $250.00 minimum purchase.

Offer expires 2/31/05 Get in before it's too late!

- Alteredspeed tunes with
"Diablosport Chipmaster Revolution"
(Predator and Delta chips)
"F.A.S.T."
"Motec"
"Electromotive" (Tec3r)
 

---

Posted by Jdub07 (Member # 2728) on :
 
who wants to go in half's with me?
 

---

Posted by Jdub07 (Member # 2728) on :
 
you could mapquest the address in his sig...granted that is where the dyno is at
 

---

Posted by outlawd94cobra (Member # 265) on :
 

quote:

---

Originally posted by SpdDevl:
I am interested depending on how far away French Camp is from Lafayette. Anyone know?

---

Your looking at about a 35 minute drive from the big L. French Camp is only like 5 minutes south of Stockton, or 5 minutes north of Manteca.
 

---

Posted by Jdub07 (Member # 2728) on :
 
thats really far for me....guess i should have mapquested it myself!
 

---

Posted by jcm3man (Member # 3834) on :
 
The sig is where the dyno is at and the location is right off of Highway 5.

If you guys ever drive to Sac Raceway I am a whole lot closer
 

---

Posted by SVTFMike (Member # 2345) on :
 
whats your hours of operation?
 

---

Posted by jcm3man (Member # 3834) on :
 
Monday - Saturday 9am - 6pm
After hours and Sundays by appointment
 

---

Posted by Fostang (Member # 3752) on :
 
I need a fast with wide band o2 and data logging capable.

How much?

and can you do initial start up program?
 

---

Posted by NavidR (Member # 3164) on :
 
I need to dyno tune my car and I have the PMS programmer, How much do you charge for me to use your dyno for about 2 hours. I will tune my self.

oh ya at that time I will order about $1000 worth of parts???????
 

---

Posted by Jdub07 (Member # 2728) on :
 

quote:

---

Originally posted by SpdDevl:
Thanks Jay,
I was too lazy to mapquest it at work. That isn't too bad but its mileage that im really paranoid about. If there are people going that are going to dyno, I will go half with them. I have never dynoed my car yet and interested to see where its at.

---

quote:

---

Originally posted by SpdDevl:

quote:

---

Originally posted by Jdub07:
Weekends work best for me since I'd have to drive an hour out...Maybe we can make an appointment with him this Sunday? Saturday I'm out of town,...if not sunday maybe next saturday the 12th.

---

Sunday is SUPERBOWL!!! I doubt that will work out and I would hate to make anyone miss that event! Lets shoot for next weekend.

---

quote:

---

Originally posted by SpdDevl:
I have nothing to do on saturday Feburary 12th. If you are free that day, I am free too. We could call Jim and ask him if that works for him too. Or we could reschedule for the 19th if you want as well.

---

quote:

---

Originally posted by jcm3man:
Monday - Saturday 9am - 6pm
After hours and Sundays by appointment

---

quote:

---

Originally posted by jcm3man:
The best way to get a hold of me, is to call me at the shop. I spend most of my time there and I don't usually get to the cafords messages until late night.

We are available to do dyno runs and can setup the date for you to come in.

I'm not clear... so are you asking to schedule the 19th at 10am???

---

12th at 10:30 AM if thats availible. is your dyno rollers or hooks up to the wheel studs?
 

---

Posted by jcm3man (Member # 3834) on :
 
The dyno is an MD-600HP inertia roller dyno that uses eddy current to measure and control the load. You drive on to the rollers like any standard chassis dyno.
 

---

Posted by jcm3man (Member # 3834) on :
 
JDUB07,
SPDEVL,

How about a little post about today...

Thanks
 

---

Posted by SVTFMike (Member # 2345) on :
 
Hey I tried calling on Friday to set up an appointment and no one answered. I left a message and no one called back either. How can I set up an appointment for my friend and I?
 

---

Posted by jcm3man (Member # 3834) on :
 

quote:

---

Originally posted by SVTFMike:
Hey I tried calling on Friday to set up an appointment and no one answered. I left a message and no one called back either. How can I set up an appointment for my friend and I?

---

I apologize for no one answering the phone... we must have been really tied up.

I did get your message and when I called back, I think it was a cell phone number and it said that the subscriber was unavailable.

Call Monday and I can set you up... or you can pm me.
 

---

Posted by SVTFMike (Member # 2345) on :
 
PM sent
 

---

Posted by season'd 88 (Member # 169) on :
 


[ February 13, 2005, 09:18 PM: Message edited by: season'd 88 ]
 

---

Posted by season'd 88 (Member # 169) on :
 


[ November 06, 2006, 02:37 AM: Message edited by: season'd 88 ]
 

---

Posted by Jdub07 (Member # 2728) on :
 
Very nice guys at Alteredspeed!

I got some good base numbers that I'll post in the Tech Section. SpdDvl's cobra did great. We got hers on vid. yet I left it at home and will have it tomorrow.

John I got your message and will give a ring so we can talk about this Saturday.
 

---

Posted by Fostang (Member # 3752) on :
 
Once these clouds go away.

You have 2 cars comming your way for a lil dyno run.
 

---

Posted by jcm3man (Member # 3834) on :
 
Fostang,

Let me know and I can schedule you in.

BTW... F.A.S.T. has a new system that is coming out in a week and I will have pricing on that soon. It is supposed to be near the existing system pricing and a much better system.
 

---

Posted by jcm3man (Member # 3834) on :
 

quote:

---

Originally posted by season'd 88:
Hey John, call this cat svtmike he PM'd me thinking i work there or some shit LOL. Hey im gonna need a cut if this keeps up.. haha

---

What??? You mean you don't work for me??? Hey that's it stop sending this guys paychecks!!!


 

---

Posted by crashtestdumba$$ (Member # 5555) on :
 
i just installed a new motor in my ride and could use the dyno time. I am located in Concord, CA. It is a short hop over the the shop from here. Do you guys want to just put together a dyno day? I could use about 2 hours to tune out the timing and fuel curves. I would go half and half for 4 hours if anyone is interested??

shoot me am email greg.jacobs@jacobsracing.com

www.jacobsracing.com
 

---

Posted by on :
 

 

---

Posted by on :
 

 

---

Posted by on :
 

 

---

Posted by on :
 

 

---

Posted by on :
 

 

---

Posted by on :
 

 

---