T O P I C R E V I E W
|
straightliner1
Member # 2679
|
posted
Deal of the Day is back! You asked for it; we're bringing it back. The Maximum Motorsports Deal of the Day will resume on Tuesday, October 2. For those of you that are unfamiliar with this amazing event: Starting at 12:00 AM Monday morning, a select group of products will be on sale for 24 hours. Each following night at midnight the Deal of the Day products will change. Click on the Deal of the Day icon on the MM website home page to find a list of each day's Deal of the Day items.
|
SydeWaySix
Member # 3596
|
posted
Yup! Got that email today too! Can't wait for coil over springs to go on sale so I can finish up my setup
**List of parts on sale (updated daily):**
10/1: CC plates (20% off) 10/2: CC plates (20% off) 10/3: IRS parts (20% off) 10/4: sorry I didn't check 10/5: k-members (20% off) 10/6: SS brake lines (15% off) 10/7: torque arm (22% off) 10/8: sorry I didn't check 10/9: front coilover kit (22% off) and Misc brake parts (15% off) 10/10: rear lower control arms (22% off) 10/11: spring isolators and steering rack bushings (18% off) 10/12: sorry I didn't check 10/13: sorry I didn't check 10/14: sorry I didn't check 10/15: sorry I didn't check 10/16: Front control arm bushings (15% off) 10/17: roll bars (20% off) 10/18: k-member brace (20% off) 10/19: SS brake lines (10% off) and swaybar end links (15% off) 10/20: Rear LCA's (22% off) 10/21: IRS parts- Rear grip package (10% off), Misc IRS bushings, brake kits, and coil overs (20% off) 10/22: SS brake hoses and hard lines (15% off) 10/23: Steering shaft (10% off) 10/24: k-members (20% off) 10/25: Bilstein shocks (10% off) 10/26: roll bars (20% off) 10/27: sorry I didn't check 10/28: CC plates (20% off) 10/29: CC plates (20% off) 10/30: sorry I didn't check 10/31: front swaybar relocation kits (15% off), Rear LCA's (22% off) 11/1: torque arm (22% off) 11/2: front control arms (22% off) 11/3: IRS parts (15% off) [ November 03, 2012, 10:38 PM: Message edited by: SydeWaySix ]
|
SnakeBit
Member # 8871
|
posted
Sick! I'm bout to drop some cash
K member, control arms, torque arm, strut tower brace, cage
|
87droptop50
Member # 7185
|
posted
quote: Originally posted by SnakeBit: Sick! I'm bout to drop some cash
K member, control arms, torque arm, strut tower brace, cage
Jay what car are you building now?
|
SnakeBit
Member # 8871
|
posted
quote: Originally posted by 87droptop50: quote: Originally posted by SnakeBit: Sick! I'm bout to drop some cash
K member, control arms, torque arm, strut tower brace, cage
Jay what car are you building now?
It's not a done deal yet but hopefully ill have a "track ready" 91 coupe sitting in my garage by next weekend. I txt you back with a picture, you didn't get it? Looks like I won't need that Panhard either if this deal goes through. You got dibbs if you need it. It would be my 1st Fox
|
NEIGHT
Member # 8741
|
posted
Hopefully they have some of the stuff I need.
|
Greasy
Member # 5258
|
posted
Of course I buy all of my suspension when the Deal Of The Day isn't going lol All I need now is a Torque Arm. [ September 28, 2012, 10:30 AM: Message edited by: Greasy ]
|
NEIGHT
Member # 8741
|
posted
Is it costly to have exhaust welded/bended to clear the panhard bar for some tips? Only reason why I won't buy one kuz I like my cars with tips. [ September 28, 2012, 03:16 PM: Message edited by: NEIGHT ]
|
Greasy
Member # 5258
|
posted
Most catbacks will clear the panhard bar, I'll be running 3" exhaust all the way back to some tailpipes and will tweak them to work with my panhard bar.
|
NEIGHT
Member # 8741
|
posted
So stock mufflers/tips should clear no problem?
|
Greasy
Member # 5258
|
posted
Yes
|
NEIGHT
Member # 8741
|
posted
Ok might need to get me one of those mothas then.
|
LXjames
Member # 10791
|
posted
I might get my k member then. I already found a connection for a mm rear end set up complete
|
9cobra7
Member # 2812
|
posted
quote: Originally posted by SnakeBit: quote: Originally posted by 87droptop50: quote: Originally posted by SnakeBit: Sick! I'm bout to drop some cash
K member, control arms, torque arm, strut tower brace, cage
Jay what car are you building now?
It's not a done deal yet but hopefully ill have a "track ready" 91 coupe sitting in my garage by next weekend. I txt you back with a picture, you didn't get it? Looks like I won't need that Panhard either if this deal goes through. You got dibbs if you need it. It would be my 1st Fox
I hope your back in it buddy, I saw that passion in your eyes at the track
|
50 Deep
Member # 6216
|
posted
How do I get on the mailing list?
|
Greasy
Member # 5258
|
posted
quote: Originally posted by 50 Deep: How do I get on the mailing list?
I've just ordered a bunch of stuff from them and they automatically sent me an email.
|
straightliner1
Member # 2679
|
posted
I had a quote drawn up for my coupe a couple years back to be done by Alan Blaine in Santa Cruz. It was for an AI legal cage - $4000. Sounds stout, but what is your life worth?
http://www.youtube.com/watch?v=eu0Wt98TT6c
|
SydeWaySix
Member # 3596
|
posted
Since I'm watching out for certain parts to go on sale I'm going to start a daily list of parts that go on sale...I hope this helps
10/1: CC plates (20% off)
|
BIzKitBrAIn
Member # 4018
|
posted
quote: Originally posted by straightliner1: I had a quote drawn up for my coupe a couple years back to be done by Alan Blaine in Santa Cruz. It was for an AI legal cage - $4000. Sounds stout, but what is your life worth?
http://www.youtube.com/watch?v=eu0Wt98TT6c
Exactly.... don't skimp on saftey..
Here are some photos of a cage I had done for a previous race car I owned. The work was done by Mike Maier of Maier Racing. This cage cost around $4500
|
SydeWaySix
Member # 3596
|
posted
K-members are 20% off today!
|
SydeWaySix
Member # 3596
|
posted
Just curious, has anyone benefitted from the Deal of the day sale yet??? I'm still waiting for coil over springs to go on sale (if they ever do).
|
MU5TANG
Member # 11875
|
posted
I've picked up a heavy duty torque arm, xd rear lower control arms, front Coilover kit w/o springs and chrome cc plates, just need a panhard bar and rear torque arm springs.
|
SnakeBit
Member # 8871
|
posted
Yup, I got 22% off of my T/A. I'm gonna install in a couple of weeks. Next is some steering upgrades
M/M FTW!
|
SwEeT 03 Gt
Member # 10283
|
posted
deal of the day today is kmembers, panhard bar n t/a good deals
|
DEVERO2
Member # 6155
|
posted
They have the K member I need on sale today. DAMN IT!! stupid wedding I have to pay for.
|