T O P I C R E V I E W
|
Built4Speed
Member # 13873
|
posted
Changed the rear speed sensors so far and still on. My OBD2 scanner doesn't see any Abs codes. Anyone know if there is a way to test if the module is bad?
|
JohnB
Member # 969
|
posted
Have you checked/changed the main fuse?
|
Built4Speed
Member # 13873
|
posted
All the fuses look good. I have power at pin 8 on the harness side connector. I'm guessing bad abs module? [ 2025-01-01, 07:46 PM: Message edited by: Built4Speed ]
|
throttlepositionsensor
Member # 14838
|
posted
Page 30 lists three different fuses for ABS https://www.forelpublishing.com/demo/Demo13990.pdf Can you find the 99-04 factory service manual? Factory service manuals have tests for all the modules.
|
Built4Speed
Member # 13873
|
posted
Here's what I've found in the shop manual. Going to send the module in for repair on eBay and see if that fixes my problem.
|
throttlepositionsensor
Member # 14838
|
posted
Did your module pass the voltage and resistance tests? Look for a replacement module at https://car-part.com It is a database of car parts from most wrecking yards in the nation. [ 2025-01-04, 04:43 PM: Message edited by: throttlepositionsensor ]
|
Built4Speed
Member # 13873
|
posted
Just got the module back after sending it away for repair and it is working. No abs light. Traction control works. I haven't dyno'd it yet but I'm pretty sure 15HP gain easily.
|