|
Author
|
Topic: Place to rebuild a 9"
|
wilit
Mustang Messiah
Member # 3367
|
posted
 
 
Anyone have a recommendation to have a 9 inch center section rebuilt in the Bay Area? Looking to have new bearings and the trac-lock clutches replaced.
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
Martinna
¯
Member # 12493
|
posted
Do you have the time and desire to do it your self? It's not that hard. The tools to do it yourself cost less than the labor.
Posts: 1093 | From: City | Registered: Oct 2012
| :
|
|
70stang351w
¯
Member # 9948
|
posted
Ask Jon Duncan(Vallejo) plan on having him do my back brace and fill and drain plugs on my 70 coupes
heard good things about about The Rearend Shop (Livermore) and i think "Dan"(NOT TURBO50- Dan)in (pleasanton area) forgot his shop name; he does rear end rebuilds..Sorry forgot his screen name and shop name but know its in the pleasanton/dublin area and his name Dan and quality of service has always been good just as the others mentioned..(Minus Turbo50)
[ 2018-01-15, 08:54 PM: Message edited by: 70stang351w ]
--------------------
1996 GT VERT /32v MOD - SOLD
1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
Wicked Motorsports
¯
Member # 8702
|
posted
if your ever down my area we can do it @rightgearandaxle Salinas Ca 93908 usually one day turnaround time call for a qoute (831)4243717
--------------------
92Fobra GT40/E303/BBK/Mac's (sold)
89notch 306HO/TFS1/BBK lt's
89CHP 331/5spd/LT's/LM1's (RIP)
65 331/HCI/TCI trans/SOLD
Posts: 2604 | From: 831salinas | Registered: Oct 2008
| :
|
|
70stang351w
¯
Member # 9948
|
posted
quote:
Originally posted by wilit:
Anyone have a recommendation to have a 9 inch center section rebuilt in the Bay Area? Looking to have new bearings and the trac-lock clutches replaced.
Ever hit anyone up yet?
--------------------
1996 GT VERT /32v MOD - SOLD
1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
quote:
Originally posted by 70stang351w:
quote:
Originally posted by wilit:
Anyone have a recommendation to have a 9 inch center section rebuilt in the Bay Area? Looking to have new bearings and the trac-lock clutches replaced.
Ever hit anyone up yet?
Not yet. I've been so busy at work and with other projects, I just haven't devoted a lot of time to this yet. So far, I've torn it down and bought a disc brake setup for it. That's about it.
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
66_5.0
¯
Member # 9974
|
posted
Did you ever get this done?
I'm currently getting a Moser M9 Fabbed housing with TruTrac POSI and sealed bearings in Sacramento at Jaws Gear and Axle.
It's not the bay area but are a very reputable shop.
--------------------
1966 Mustang
Posts: 1967 | Registered: Apr 2010
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
quote:
Originally posted by 66_5.0:
Did you ever get this done?
I'm currently getting a Moser M9 Fabbed housing with TruTrac POSI and sealed bearings in Sacramento at Jaws Gear and Axle.
It's not the bay area but are a very reputable shop.
Yeah, actually I should be picking it up from the Rear End Shop next week. Ended up going with a TruTrac as well.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
70stang351w
¯
Member # 9948
|
posted
Hey Wilit get the 9in installed? Just ordered my torq arm setup that needs to be welded to the 9in center section..just need a back brace, drain and fill plugs..
--------------------
1996 GT VERT /32v MOD - SOLD
1970 Mustang Coupe M-Code 351w
Posts: 1419 | From: 925 | Registered: Apr 2010
| :
|
|
wilit
Mustang Messiah
Member # 3367
|
posted
quote:
Originally posted by 70stang351w:
Hey Wilit get the 9in installed? Just ordered my torq arm setup that needs to be welded to the 9in center section..just need a back brace, drain and fill plugs..
I'm fighting a losing battle for work space in my garage. Just when I get it cleared out so I can work on it, my wife brings more shit home, or moves old shit out of the house into the garage and the cleaning cycle starts all over. Someday I will get this car done, but that day is not today.
--------------------
"If a man hasn't found something worth dying for, he isn't fit to live." - Martin Luther King Jr.
Posts: 4793 | From: 37.78514° North 122.40100° West | Registered: Oct 2003
| :
|
|
Martinna
¯
Member # 12493
|
posted
Got room for a shed on the side of your house? Throwing what you don't often use in a shed can open up a lot of room to wrench on car projects.
Posts: 1093 | From: City | Registered: Oct 2012
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
