This is topic Need help wiring radio in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=029916

---

Posted by naked5.0notch (Member # 14058) on :
 
Need some help installing a pioneer flip up deck. The stock harness is hacked up and not sure on wiring as far as they speakers and such. Located in Dublin if anybody can help
 

---

Posted by Martinna (Member # 12493) on :
 
Ford stereo wiring:


Right Front +: White-Light Green
Right Front -: Dark Green-Orange
Left Front +: Orange-Light Green
Left Front -: Light Blue-White
Right Rear +: Orange-Red
Right Rear -: Brown-Pink
Left Rear +: Grey-Light Blue
Left Rear -: Tan-Yellow

For MACH 460/1000 system
Amp Enable: Pink-Light Blue
Pre-Out Right Rear +: Tan-Light Green
Pre-Out Right Rear -: White-Pink
Pre-Out Left Rear +: Tan-White
Pre-Out Left Rear -: Dark Blue-Orange

Other circuits going to the radio:
Back light: Light Blue-Pink
Battery +: Light Green-Pink
Ignition Run +: Brown-Pink
Ground: Black-Light Green
 

---

Posted by naked5.0notch (Member # 14058) on :
 
Thanks that helped. What about for running a amp for the signal wire ?
 

---

Posted by Martinna (Member # 12493) on :
 
The signal wire that turns on the amp? I think it goes to an ignition wire that goes hot with the key in the on position. I think MACH 460/1000 systems were the first to introduce this wire in the radio connector. Older cars need to tap into a fusbox line. http://www.veryuseful.com/mustang/tech/engine/ has wiring diagrams and so do repair manuals from auto parts stores.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com