|
Author
|
Topic: Lights out on 88 cluster...??
|
Bottle Fed
¯
Member # 2686
|
posted
 
 
Getting my car back together and the lights are out on 3/4 of the gauge cluster..I checked all the bulbs before I put the cluster back in and thought they were all good...is there something else on the wiring on the back of the cluster that can be changed...??? I'd change the whole cluster easily if it wasn't a Saleen specific one...
Thanks
Paul
--------------------
1988 Saleen convt #522 SC
1989 Saleen #420 408 w/BOOST!
2009 M5
2000 Yamaha R1
2016 S6
Posts: 2269 | From: San Francisco | Registered: Apr 2003
| :
|
|
LXjames
¯
Member # 10791
|
posted
Swap a couple good working bulbs to the dead spots. If I good bulb doesn't work then it's probably the printed circuit or poor contacts. Also check any related fuses and the power wire to the cluster lights or however ford designed that circuit
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
naked5.0notch
¯
Member # 14058
|
posted
Also take the bulbs out and try to turn them 180 degrees then reinstall. My turn signals weren't lighting up after replacing a bunch of bulbs so did that then they started working.
Posts: 1223 | Registered: May 2015
| :
|
|
Bottle Fed
¯
Member # 2686
|
posted
Thanks guys, already tried moving the bulbs a little bit...I think the circuit board could be bad....does anybody know a place that fixes these things....??
--------------------
1988 Saleen convt #522 SC
1989 Saleen #420 408 w/BOOST!
2009 M5
2000 Yamaha R1
2016 S6
Posts: 2269 | From: San Francisco | Registered: Apr 2003
| :
|
|
Martinna
¯
Member # 12493
|
posted
There could be a burned trace. If I remember right, the bulb wiring is made of flexible traces on a plastic film. It could have burned through at one point. Use an OHM meter to find the broken spot. Scrap off some of the plastic coating on both sides of the break to expose the raw trace and put conductive glue over it. Let the conductive glue sit in the sun to dry, and then wait 24 hours. It dries slow. You can buy cheap conductive glue in syringes online. Get the syringe type, stay away from the cheaper black gunk conductive glue.
Posts: 1093 | From: City | Registered: Oct 2012
| :
|
|
hurting your feelings
¯
Member # 13641
|
posted
quote:
Originally posted by Bottle Fed:
Thanks guys, already tried moving the bulbs a little bit...I think the circuit board could be bad....does anybody know a place that fixes these things....??
Speedotach in Concord does.
Posts: 1830 | From: In front of the bank with a 45 an a ski mask | Registered: Jun 2014
| :
|
|
Bottle Fed
¯
Member # 2686
|
posted
Thanks Martinna hope I can figure it out...guessing I look for breaks in the circuit board plastic
--------------------
1988 Saleen convt #522 SC
1989 Saleen #420 408 w/BOOST!
2009 M5
2000 Yamaha R1
2016 S6
Posts: 2269 | From: San Francisco | Registered: Apr 2003
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
