Author
|
Topic: Can some one help me with my car
|
93 5.0
¯
Member # 12418
|
posted
I have. 93 mustang gt 50 and it's started to sputtering about a month ago since then I change the dizzy with a new one new coil new plugs, wires cap and rotor new fuel filter and reg and diff injectors and clean the mass air and tried a diff ecu and new battery and alt and the car sputter about 2000-3000 rpm and kinda clears up after 3000 any ideas ??
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
Marks93
¯
Member # 11130
|
posted
Does it start up and idle fine? Do you have any leaks?
Check fuel pressure, might be a fuel pump going south. Check out all your vacuum lines. These cars are getting older and the rubber lines might develop cracks in them.
Posts: 824 | From: Earth | Registered: Jul 2011
| :
|
|
93 5.0
¯
Member # 12418
|
posted
I've check the tps and tried a new mass air still the same I'm going to get a gauge to test the fuel after that idk what els it could be
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
93 5.0
¯
Member # 12418
|
posted
I have 32 at idle and it drops to 30 psi
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
92_5.0
¯
Member # 7624
|
posted
is the motor stock? Maybe re-check the gap on the plugs. Plug wires aren't resting on the headers?
-------------------- Infineon/Sears point? same difference! 11.8 @ 115 mph @ Sac Raceway 411 rwhp 402 trq (old set up) 540 rwhp 517 rwtrq (new set up) ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
93 5.0
¯
Member # 12418
|
posted
Gt40p heads e303 cam bbk longtubs and gt40 upper and Lower new plugs and wires as of yesterday
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|
LXjames
¯
Member # 10791
|
posted
quote: Originally posted by 93 5.0: I have 32 at idle and it drops to 30 psi
Your about 10 pounds low on fuel pressure
-------------------- On Point Motorsport prez. King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
93 5.0
¯
Member # 12418
|
posted
You think that my problem that's the only thing I have not swap out is the pump
Posts: 230 | From: 209 | Registered: Sep 2012
| :
|
|