|
Author
|
Topic: droping in a 01 4.6 on my 98 need help !!
|
86 T TOPS
¯
Member # 8855
|
posted
 
 
Hey folks I'm pulling out the engine out of my 98 and droping in one from a 01 crown Vic but I see that I have to swap all the pullies and it also looks like the top and lower intake manifold they all look diffrent . Anyone here has done this ? I need help ASAP folks
--------------------
TTOPNGT
Posts: 704 | From: redwood city | Registered: Jan 2009
| :
|
|
|
|
SacStangDriver
¯
Member # 8304
|
posted
is your car an existing 4.6?
--------------------
Need sidework done at great prices? I work on all makes and models from engine work to gears. Check engine light problems too. 916 912 3493
Posts: 1217 | From: sacramento | Registered: Mar 2008
| :
|
|
86 T TOPS
¯
Member # 8855
|
posted
Yes its a 98 gt
--------------------
TTOPNGT
Posts: 704 | From: redwood city | Registered: Jan 2009
| :
|
|
SSP NOTCH
¯
Member # 13449
|
posted
The vic motor is a little different than the mustang motor, but the differences are easy to swap. The throttle body and plenum point the opposite direction on the vic motor. Just unbolt your mustang one and bolt it onto the vic intake pointing the correct direction for you mustang. Then the only other thing that you should have to change is your exhaust manifolds, because the egr pipe on the mustang plenum goes to the passenger side manifold and the vic one goes to the drivers side. Everything else should match up without issue. Hope this helps.
Posts: 53 | From: Bay Area | Registered: Feb 2014
| :
|
|
86 T TOPS
¯
Member # 8855
|
posted
Ssp notch how about the pullies ?they all look diffrent do I need to swap em aswell
--------------------
TTOPNGT
Posts: 704 | From: redwood city | Registered: Jan 2009
| :
|
|
SSP NOTCH
¯
Member # 13449
|
posted
Ive never heard of people having to swap the pulleys. But i dont see why the ones from your mustang wouldn't just swap over. Id leave the vic pulleys on and see if they work. If they don't, swap over your mustang stuff.
Posts: 53 | From: Bay Area | Registered: Feb 2014
| :
|
|
|
|
Email this post to someone!
Printer friendly view of this Ford topic
