|
Author
|
Topic: new mods
|
gypsy88
¯
Member # 13891
|
posted
 
 
I've got some parts accumulating just looking for some insight. Comp cam, gt40p heads,trick flow track heat manifold, 30 lb injectors. Doing a quick port job on the heads.
Posts: 58 | From: rocklin | Registered: Dec 2014
| :
|
|
Blow_U_In_Reverse
¯
Member # 12298
|
posted
What kind of insight??
My advice, sell the gt40p's and get some aluminum heads.. those injectors are going to be overkill, 24lb injectors should be more than enough..
--------------------
"Real Men Get BLOWN"
-1993 Cobra "COBRUUH"
-1984 T-Top Notchback
#KurganTuned
Posts: 2688 | From: FiJi-925-650 | Registered: Aug 2012
| :
|
|
gypsy88
¯
Member # 13891
|
posted
Do I need bigger fuel rails, fuel pressure regulator? I am going to go with a 75mm tb. What about pedistal rockers and push rod length,I don't want my valve kissing the pistons??..
Posts: 58 | From: rocklin | Registered: Dec 2014
| :
|
|
LXjames
¯
Member # 10791
|
posted
quote:
Originally posted by gypsy88:
Do I need bigger fuel rails, fuel pressure regulator? I am going to go with a 75mm tb. What about pedistal rockers and push rod length,I don't want my valve kissing the pistons??..
Get some aluminum heads check for ptv like always! You don't know if the heads been milled or block decked. That will also give you an answer for push rod length. And like Fiji said, step down to some 24's stock rails with an adjustable regulator will be fine.
--------------------
On Point Motorsport prez.
King Lx
Posts: 4761 | From: Pittsburg CA | Registered: Mar 2011
| :
|
|
NEIGHT
¯
Member # 8741
|
posted
quote:
Originally posted by gypsy88:
Do I need bigger fuel rails, fuel pressure regulator? I am going to go with a 75mm tb. What about pedistal rockers and push rod length,I don't want my valve kissing the pistons??..
Stock fuel rails are fine for your setup. They sell a tool called a pushrod length checker where you can find the length you need since the pushrod is adjustable in length. As for PTV clearance I used play-doh on the piston, set up the heads, then spun the motor by hand a few times.
--------------------
-Savage Habits-
1992 Summer Edition
1986 Hatch- catfish killer
1964 Impala hard top
Posts: 18548 | From: EA$T $IDE REDWOOD CITY | Registered: Nov 2008
| :
|
|
gypsy88
¯
Member # 13891
|
posted
On a budget for the heads are there a pair that won't hurt the wallet???
Posts: 58 | From: rocklin | Registered: Dec 2014
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
