T O P I C R E V I E W
|
ponykid90
Member # 12978
|
posted
i recently just changed over to gt40p heads from stock heads, i was wondering is the height of the rockers/heads higher than stock rockers/heads ... the reason I ask is because i used my regular ford valve covers on the gt40p heads and im getting a ticking sound, sounds like its coming from valve cover area...
just put motor in, new seals, gaskets, 20w-50 oil, everything torqued to specs.... any ideas??
|
Blow_U_In_Reverse
Member # 12298
|
posted
If u are using aftermarket rockers then you will need to remove the baffles from the valve covers..
If you removed the baffles already, go back & check to make sure the valves are adjusted properly..
I usually use 10w-30 or 10w-40 oil..
|
|