T O P I C R E V I E W
|
in4thewin24
Member # 13648
|
posted
I have found a deal on most the parts I will be needing to do the swap; but want to confirm something before finalizing. My car is an automatic car, so is it correct that since this is so I would not need the manual transmissions computer? Also it is missing the manual transmissions wiring harness; do I need this? Thanks any help is appreciated.
|
NEIGHT
Member # 8741
|
posted
You need both.
|
rollininmy50
Member # 9067
|
posted
+1
|
Wht86drop
Member # 12104
|
posted
I've seen people use auto computers in a manual no problems. Manual transmission harness you do need. Also the oxygen sensor harness needs to be changed if I remember correctly.
|
i
Member # 12534
|
posted
Don't forget the harness for the reverse tail lights!
|
MUSTTANGUY
Member # 2251
|
posted
I have reconditioned transmission harnesses available w/ reverse jumper harness included.
|
hurting your feelings
Member # 13641
|
posted
quote: Originally posted by NEIGHT: You need both.
An you would be wrong.
|
SIC9250
Member # 8216
|
posted
quote: Originally posted by hurting your feelings: quote: Originally posted by NEIGHT: You need both.
An you would be wrong.
This.
|
SLOW95GTS
Member # 10365
|
posted
the a9p computer will work for a manual car.
|
NEIGHT
Member # 8741
|
posted
quote: Originally posted by SIC9250: quote: Originally posted by hurting your feelings: quote: Originally posted by NEIGHT: You need both.
An you would be wrong.
This.
The reverse lights and nuetral safety switch would work?
|
hurting your feelings
Member # 13641
|
posted
quote: Originally posted by NEIGHT: quote: Originally posted by SIC9250: quote: Originally posted by hurting your feelings: quote: Originally posted by NEIGHT: You need both.
An you would be wrong.
This.
The reverse lights and nuetral safety switch would work?
Can use a auto ecm. An you can jump the neutral safety switch.
If you use 5sp ecm you have to change the 02 harness.
|
fredfifty
Member # 10320
|
posted
quote: Originally posted by hurting your feelings: quote: Originally posted by NEIGHT: quote: Originally posted by SIC9250: quote: Originally posted by hurting your feelings: quote: Originally posted by NEIGHT: You need both.
An you would be wrong.
This.
The reverse lights and nuetral safety switch would work?
Can use a auto ecm. An you can jump the neutral safety switch.
If you use 5sp ecm you have to change the 02 harness.
What would be the jumper wire placement on the sensor side of the harness?
|
WANARNM
Member # 587
|
posted
I left the aod computer and jumped the Neutral safety switch . I rigged my reverse light sensor by cutting up the molding around the cables . Just as a quick fix. It worked. But I would eventually purchase one. They not that much. Good luck. [ 2018-08-09, 10:30 PM: Message edited by: WANARNM ]
|