T O P I C R E V I E W
|
Tom Renzo
Member # 13165
|
posted
Ok this question has been asked since the oil filter was invented. WHAT OIL FILTER DO YOU GUYS USE??? I do not use FRAM and have only had one issue with one. But since then we normally avoid fram filters like the PLAGUE. We use motor-craft wicks and NAPA which is made by wicks. Any input on this is well received and i think a good topic. lay it on me guys!!!
|
SLOW95GTS
Member # 10365
|
posted
Motorcraft every time!, but if their not available i usually get Purolator since i've worked at a oil changing spot and that's all we used.
|
70stang351w
Member # 9948
|
posted
Motorcraft or napa
|
Duncan Motors
Member # 7045
|
posted
wix,s, i had another filter implode on me before. i forgot but it was cheap, i heard of frams meessing up so its just wix, and of course dealer stuff if they still even make it in house.
|
Tom Renzo
Member # 13165
|
posted
Mr Duncan . i always used factory honda filters till i busted one open. It was a FRAM!!!! So is SUBARU!!!
|
firemen87
Member # 13492
|
posted
motorcraft
|
ECOboostin
Member # 4347
|
posted
Motorcraft or napa gold AKA Wix
|
red5o
Member # 12651
|
posted
Yea motocraft.... I used wix one time and had low oil pressure proalator is good too I use that on all my other cars but I didn't know napa filters were made by wix [ 2014-03-15, 12:07 AM: Message edited by: red5o ]
|
4IDFOX
Member # 9921
|
posted
Wix racing on my race car and the standard wix on my street cars and truck. The wix racing has a thicker case.
|
Saleen 00-0768
Member # 9379
|
posted
Wix, K&N, Amsoil
|
Tom Renzo
Member # 13165
|
posted
That is what i thought. I brought all my FRAM filers to the RANGE. The guys are blowing them apart as we speak. Thank You
|
Blue92
Member # 8789
|
posted
I only use Wix. 51515 for my 92, easiest number to remember.
|
lubedealer
Member # 13499
|
posted
what you want is a low micron rated filter with great flow k&n filters down to 25 microns but wont say what is absolute where as the amsoil filter is 100% at 20 microns has excellent flow and holding capacities prefer to no what is absolute same as in air filtering micron rating is extremely important as we dont want rubbing compound in our engines
|
Secnd2nun64
Member # 1431
|
posted
I use the silver fram tough guard, never had any issues. I've used motorcraft too, I notice that they are bigger in diameter though making it hard to fit on my setup.
|
9165pt0
Member # 7625
|
posted
i stick to the motorcraft filter. but have heard many positive reviews of wix and purolater filters
|
9165pt0
Member # 7625
|
posted
i stick to the motorcraft filter. but have heard many positive reviews of wix and purolater filters
|
JZTRK
Member # 7641
|
posted
I have a shelf with a half dozen FL-1A filters thay fit my 302 and my 460 every time the county runs the free oil filter for a new one program I always take in as many as i can find [ 2014-03-18, 02:19 PM: Message edited by: JZTRK ]
|