T O P I C R E V I E W
|
Status_B
Member # 13407
|
posted
Does anyone know what the lift is on a factory camshaft for a 1966 289 c code?
|
Secnd2nun64
Member # 1431
|
posted
Not sure but if your looking for a cam, you'll be very happy with a comp 268h.
|
Status_B
Member # 13407
|
posted
Flat tappet right? ND what lifters did you use? Solid or hydrologic?
|
Duncan Motors
Member # 7045
|
posted
lifters are matched to your cam. no stock factory cam came solid in those years or size motor.
|
Secnd2nun64
Member # 1431
|
posted
You can purchase the lifters and cam as a package. You'll need to replace lifters with any cam change. Like Duncan said, they are matched sets. The only 289 I'm aware of that came with factory solid lifters is the hipo k code 289. As for your car, your going to have hydraulic. On the 268h (h stands for hydraulic).
|
wilit
Member # 3367
|
posted
A stock C code cam was 380 exh lift, 360 int lift and 244 exh and 266 int duration. Pretty small cam, but given all C code heads were press in studs, it's not surprising it's got such low lift specs.
|