|
Author
|
Topic: Cobra brake conversion on 85 questions
|
norcalfiddy
¯
Member # 11207
|
posted
 
 
Just about to finish up on my swap and I have a few questions. Setup is 4 wheel disk with 13" cobra brakes up front and cobra in rear.
What master and booster do I gotta run? Can I run a stock 94-95 setup? 93 cobra? Or 03-04 cobra?
What brake lines do I use for front?
I know to run a adjustable prop valve on pass. side firewall so do I run the sn95 stock prop valve as we'll under m/c?
Anything else I need to do?
--------------------
600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
93lx4cyl
¯
Member # 10517
|
posted
Should be sn95 brake hoses and one side(i f I remember correctly its F Pass side) needs an adapter to put soft line to hard line.
95 booster with 93 master cyl
Don't forget the 93 cobra e brake cables to retain your parking brake
I think your stock fox brake lines work in the back but I may be wrong
Posts: 204 | From: Sacramento | Registered: Dec 2010
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
I think the 94-95 rear brake hoses at the caliper will work with the stock hardline on the axle.
--------------------
91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
norcalfiddy
¯
Member # 11207
|
posted
ok thanks guys.. e brake is already hooked up and working, thats how i stop the car when im moving it. lol
my stock rubber line and rear lines are all mounted and ready, just need front.
--------------------
600HP 1996 7.3L powerstroke single cab short bed race truck
Posts: 3393 | From: Brentwood | Registered: Aug 2011
| :
|
|
Email this post to someone!
Printer friendly view of this Ford topic
