Author
|
Topic: Foxbody wheel stud question
|
92_5.0
¯
Member # 7624
|
posted
I need to upgrade my rear wheel studs on my 92, its still a 4 lug drum. Anyone recommended a good set of studs? Also, does anyone know off the top of their head what the knurl diameter is and the stock length? I know the thread size is 1/2-20 in RH. If not I can always measure when I get home from work. I'm running 15x10 draglites with the long lug nuts. Thanks.
-------------------- Infineon/Sears point? same difference! 11.8 @ 115 mph @ Sac Raceway 411 rwhp 402 trq (old set up) 540 rwhp 517 rwtrq (new set up) ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
Wheel Bolt Knurl Dia. : .618" Wheel Bolt Overall Length : 1 13/16" Wheel Bolt Shoulder Length : 3/8" Wheel Bolt Thread Size : 1/2"-20 Wheel Bolt Threads : Right Hand Wheel Bolt Head Marks : 260, PA
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
92_5.0
¯
Member # 7624
|
posted
Thank you! Do you know if its possible to use a .625 knurl?
-------------------- Infineon/Sears point? same difference! 11.8 @ 115 mph @ Sac Raceway 411 rwhp 402 trq (old set up) 540 rwhp 517 rwtrq (new set up) ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|
5.0 LsX
¯
Member # 10017
|
posted
should be ok..i would want to see how it presses in first. so for the record no lol
-------------------- 91' Notch
Posts: 1260 | Registered: May 2010
| :
|
|
92_5.0
¯
Member # 7624
|
posted
My thoughts exactly lol. I measured the inner diameter of the stud housing on the axle and its .600 so I'm going to try these moser .615 from summit http://m.summitracing.com/parts/msr-8235
-------------------- Infineon/Sears point? same difference! 11.8 @ 115 mph @ Sac Raceway 411 rwhp 402 trq (old set up) 540 rwhp 517 rwtrq (new set up) ET's to come
Posts: 1629 | From: bay area | Registered: May 2007
| :
|
|